Filter :
Standard and/or project | Stage | TC |
---|---|---|
Title missing
|
95.99 | ISO/TC 138 |
Title missing
|
95.99 | ISO/TC 138 |
Title missing
|
95.99 | ISO/TC 138 |
Title missing
|
95.99 | ISO/TC 138 |
Thermoplastics pipes for the transport of fluids — Nominal outside diameters and nominal pressures — Part 1: Metric series
|
95.99 | ISO/TC 138 |
Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures — Part 1: Metric series
|
95.99 | ISO/TC 138 |
Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures — Part 1: Metric series
|
90.93 | ISO/TC 138 |
Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures — Part 1: Metric series — Amendment 1
|
60.60 | ISO/TC 138 |
Thermoplastic pipes for the transport of fluids — Nominal outside diameters and nominal pressures — Part 2: Inch series
|
95.99 | ISO/TC 138 |
Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures — Part 2: Inch-based series
|
90.93 | ISO/TC 138 |
Pipes and fittings of plastics materials — Fittings for domestic and industrial waste pipes — Basic dimensions: Metric series — Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
|
90.93 | ISO/TC 138/SC 1 |
Withdrawal of ISO/R 1164-1970
|
95.99 | ISO/TC 138 |
Withdrawal of ISO/R 1165-1970
|
95.99 | ISO/TC 138 |
Withdrawal of ISO/R 1166-1970
|
95.99 | ISO/TC 138 |
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method
|
90.93 | ISO/TC 138/SC 5 |
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
|
90.60 | ISO/TC 138/SC 5 |
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 3: Preparation of components
|
90.93 | ISO/TC 138/SC 5 |
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 4: Preparation of assemblies
|
90.93 | ISO/TC 138/SC 5 |
Plastics pipes for the transport of fluids — Determination of the resistance to internal pressure
|
95.99 | ISO/TC 138 |
Thermoplastics pipes for the conveyance of fluids — Resistance to internal pressure — Test method
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics pipes for the conveyance of fluids — Resistance to internal pressure — Test method — Technical Corrigendum 1
|
95.99 | ISO/TC 138/SC 5 |
Withdrawal of ISO/R 1330-1970
|
95.99 | ISO/TC 138 |
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 1: General
|
90.20 | ISO/TC 138/SC 2 |
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 2: Pipes
|
90.20 | ISO/TC 138/SC 2 |
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 3: Fittings
|
90.20 | ISO/TC 138/SC 2 |
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 4: Valves
|
90.20 | ISO/TC 138/SC 2 |
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 5: Fitness for purpose of the system
|
90.20 | ISO/TC 138/SC 2 |
Rubber or plastics hoses and tubing — Bending tests
|
95.99 | ISO/TC 45/SC 1 |
Rubber or plastics hoses and tubing — Bending tests — Technical Corrigendum 1
|
95.99 | ISO/TC 45/SC 1 |
Withdrawal of ISO 2056-1976
|
95.99 | ISO/TC 138 |
Thermoplastics pipes — Longitudinal reversion — Part 1: Determination methods
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics pipes — Longitudinal reversion — Part 2: Determination parameters
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics pipes — Longitudinal reversion — Part 2: Determination parameters — Technical Corrigendum 1
|
95.99 | ISO/TC 138/SC 5 |
Unplasticized polyvinyl chloride (PVC) pipes — Longitudinal reversion — Test methods and specification
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics pipes — Longitudinal reversion — Test method and parameters
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics pipes — Longitudinal reversion — Test method and parameters
|
60.60 | ISO/TC 138/SC 5 |
Polyethylene pipes (PE) — Longitudinal reversion — Test methods and specification
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method
|
90.92 | ISO/TC 138/SC 5 |
Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
|
90.92 | ISO/TC 138/SC 5 |
Thermoplastics pipes and fittings — Vicat softening temperature — Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
|
90.92 | ISO/TC 138/SC 5 |
Unplasticized polyvinyl chloride (PVC) pipes and fittings — Vicat softening temperature — Test method and specification
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics pipes and fittings - Vicat softening temperature: General test method and test conditions for Vinyl chloride - based (PVC-U, PVC-C, PVC-Hi) and Acryl nitrile - based (ABS, ASA) Pipes and Fittings
|
30.99 | ISO/TC 138/SC 5 |
Unplasticized polyvinyl chloride (PVC) pipes — Water absorption — Determination and specification
|
95.99 | ISO/TC 138/SC 5 |
Unplasticized polyvinyl chloride (PVC) pipes for potable water supply — Extractability of lead and tin — Test method
|
90.93 | ISO/TC 138/SC 5 |
Plastics pipes — Measurement of dimensions
|
95.99 | ISO/TC 138/SC 5 |
Plastics piping systems — Plastics components — Determination of dimensions
|
90.93 | ISO/TC 138/SC 5 |
Unplasticized polyvinyl chloride (PVC) pipes for the transport of fluids — Determination and specification of resistance to external blows
|
95.99 | ISO/TC 138 |
Thermoplastics pipes — Determination of resistance to external blows — Round-the-clock method
|
90.93 | ISO/TC 138/SC 5 |
Polypropylene pipes — Burst test requirements
|
95.99 | ISO/TC 138/SC 5 |
Polypropylene pipes — Reduction of permissible stress as a function of time and temperature
|
95.99 | ISO/TC 138 |
Polypropylene (PP) pipes — Effect of time and temperature on expected strength
|
95.99 | ISO/TC 138/SC 5 |
Polypropylene (PP) pipes — Effect of time and temperature on the expected strength
|
90.93 | ISO/TC 138/SC 5 |
Unplasticized polyvinyl chloride (PVC) pipes — Specification and determination of resistance to acetone
|
95.99 | ISO/TC 138/SC 5 |
Unplasticized polyvinyl chloride (PVC) pipes — Effect of sulphuric acid — Requirement and test method
|
95.99 | ISO/TC 138/SC 5 |
Unplasticized polyvinyl chloride (PVC) pipes — Specification and measurement of opacity
|
95.99 | ISO/TC 138/SC 5 |
Polypropylene (PP) pipes and fittings — Density — Determination and specification
|
95.99 | ISO/TC 138/SC 5 |
Polypropylene (PP) pipes — Determination of longitudinal reversion
|
95.99 | ISO/TC 138 |
Polypropylene (PP) pipes — Maximum permissible longitudinal reversion
|
95.99 | ISO/TC 138/SC 5 |
Chlorinated polyvinyl chloride (CPVC) pipes and fittings — Specification and determination of density
|
90.93 | ISO/TC 138/SC 5 |
Unplasticized polyvinyl chloride (PVC) pipes — Tolerances on outside diameters and wall thicknesses
|
95.99 | ISO/TC 138 |
Polyethylene (PE) pipes — Tolerances on outside diameters and wall thicknesses
|
95.99 | ISO/TC 138 |
Chlorinated polyvinyl chloride (CPVC) pipes — Tolerances on outside diameters and wall thicknesses
|
95.99 | ISO/TC 138 |
Polypropylene (PP) pipes — Tolerances on outside diameters and wall thicknesses
|
95.99 | ISO/TC 138 |
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Unplasticized poly(vinyl chloride) (PVC-U)
|
90.93 | ISO/TC 138/SC 1 |
Polyethylene (PE) pipes and fittings — Designation of polyethylene, based on nominal density and melt flow index
|
95.99 | ISO/TC 138 |
Polyethylene (PE) pipes — Pressure drop in mechanical pipe-jointing systems — Method of test and requirements
|
90.93 | ISO/TC 138/SC 5 |
Thermoplastic pipes — Universal wall thickness table
|
95.99 | ISO/TC 138 |
Thermoplastics pipes — Universal wall thickness table
|
95.99 | ISO/TC 138 |
Thermoplastics pipes — Universal wall thickness table
|
90.93 | ISO/TC 138 |
Glass‐reinforced thermosetting plastics (GRP) pipes — Determination of the apparent axial long‐term modulus of pipes subject to beam bending
|
60.60 | ISO/TC 138/SC 6 |
Unplasticized polyvinyl chloride (PVC-U) pipes for water supply — Recommended practice for laying
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems for water supply — Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) — Guidance for installation
|
90.93 | ISO/TC 138/SC 2 |
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 1: General
|
95.99 | ISO/TC 138/SC 2 |
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 2: Pipes (with or without integral sockets)
|
95.99 | ISO/TC 138/SC 2 |
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 3: Fittings and joints
|
95.99 | ISO/TC 138/SC 2 |
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 4: Valves and ancillary equipment
|
95.99 | ISO/TC 138/SC 2 |
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Part 5: Fitness for purpose of the system
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Amendment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 1: General — Technical Corrigendum 1
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) — Part 1: General
|
90.60 | ISO/TC 138/SC 2 |
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes — Amendment 1
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes
|
90.60 | ISO/TC 138/SC 2 |
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 5: Fitness for purpose of the system
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 5: Fitness for purpose of the system
|
90.60 | ISO/TC 138/SC 2 |
Polyethylene (PE) pipes for water supply — Specifications
|
95.99 | ISO/TC 138/SC 2 |
Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 1: Immersion test method
|
90.92 | ISO/TC 138/SC 3 |
Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 2: Polyolefin pipes
|
90.92 | ISO/TC 138/SC 3 |
Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 3: Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly (vinyl chloride) (PVC-HI) and chlorinated poly (vinyl chloride) (PVC-C) pipes
|
90.92 | ISO/TC 138/SC 3 |
Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 4: Poly(vinylidene fluoride) (PVDF) pipes
|
90.92 | ISO/TC 138/SC 3 |
Polyolefin pipes — Resistance to chemical fluids — Immersion test method — System for preliminary classification
|
95.99 | ISO/TC 138/SC 3 |
Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U)
|
90.93 | ISO/TC 138/SC 1 |
Unplasticized polyvinyl chloride (PVC) pipes and fittings — Determination and specification of density
|
90.93 | ISO/TC 138/SC 5 |
Thermoplastics pipes and fittings — Determination of melt mass-flow rate — Part 1: Test method
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics pipes and fittings — Determination of melt mass-flow rate — Part 2: Test conditions
|
95.99 | ISO/TC 138/SC 5 |
Polyethylene (PE) pipes and fittings — Determination of melt flow rate
|
95.99 | ISO/TC 138 |
Polyethylene (PE) pipes and fittings — Determination of reference density of uncoloured and black polyethylenes
|
95.99 | ISO/TC 138/SC 5 |
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water — Arch-shaped, corrugated wall chambers made of PE or PP used for retention, detention, storage and transportation of storm water systems — Product specifications and performance criteria
|
60.60 | ISO/TC 138/SC 1 |
Thermoplastics pipes — Determination of tensile properties — Part 1: General test method
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics pipes — Determination of tensile properties — Part 1: General test method
|
90.93 | ISO/TC 138/SC 5 |
Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI)
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI)
|
60.60 | ISO/TC 138/SC 5 |
Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes
|
90.93 | ISO/TC 138/SC 5 |
Pipes and fittings of acrylonitrile/butadiene/ styrene terpolymer (ABS) — Chemical resistance with respect to fluids
|
95.99 | ISO/TC 138 |
Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method and basic specification
|
95.99 | ISO/TC 138/SC 5 |
Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method
|
90.92 | ISO/TC 138/SC 5 |
Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply — Extractability of cadmium and mercury occurring as impurities
|
95.99 | ISO/TC 138/SC 5 |
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Thermoplastics — Recommended practice for installation
|
90.93 | ISO/TC 138/SC 1 |
Above-ground drainage — Recommended practice and techniques for the installation of unplasticized polyvinyl chloride (PVC-U) sanitary pipework for above-ground systems inside buildings
|
95.99 | ISO/TC 138/SC 1 |
Recommended techniques for the installation of unplasticized poly(vinyl chloride) (PVC-U) buried drains and sewers
|
95.99 | ISO/TC 138/SC 1 |
Performance requirements for plastics pipes and fittings for use in underground drainage and sewage
|
95.99 | ISO/TC 138/SC 1 |
Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) — General specification for moulding and extrusion materials
|
90.93 | ISO/TC 138/SC 5 |
Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) — General specification for moulding and extrusion materials
|
90.93 | ISO/TC 138/SC 5 |
Glass fibre reinforced thermosetting plastics (GRP) pipes and fittings — Nominal diameters, specified diameters and standard lengths
|
95.99 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
|
95.99 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
|
95.99 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
|
60.60 | ISO/TC 138/SC 6 |
Polypropylene (PP) pipes and fittings — Chemical resistance with respect to fluids
|
95.99 | ISO/TC 138 |
Low density polyethylene pipes and fittings — Chemical resistance with respect to fluids
|
95.99 | ISO/TC 138 |
Unplasticized polyvinyl chloride pipes and fittings — Chemical resistance with respect to fluids
|
95.99 | ISO/TC 138 |
High density polyethylene pipes and fittings — Chemical resistance with respect to fluids to be conveyed
|
95.99 | ISO/TC 138 |
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of time to failure under sustained internal pressure
|
95.99 | ISO/TC 138/SC 6 |
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of time to failure under sustained internal pressure
|
90.93 | ISO/TC 138/SC 6 |
Plastics piping systems — Glass-reinforced plastics (GRP) components — Determination of the amounts of constituents using the gravimetric method
|
95.99 | ISO/TC 138/SC 6 |
Plastics piping systems — Glass-reinforced plastics (GRP) components — Determination of the amounts of constituents
|
90.93 | ISO/TC 138/SC 6 |
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the leaktightness of the wall under short-term internal pressure
|
90.93 | ISO/TC 138/SC 6 |
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Polypropylene (PP)
|
90.20 | ISO/TC 138/SC 1 |
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Chlorinated poly(vinyl chloride) (PVC-C)
|
90.93 | ISO/TC 138/SC 1 |
Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane test
|
95.99 | ISO/TC 138/SC 5 |
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Acrylonitrile-butadiene-styrene (ABS)
|
90.20 | ISO/TC 138/SC 1 |
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the creep factor under dry conditions
|
95.99 | ISO/TC 138/SC 6 |
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of initial specific ring stiffness
|
95.99 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of initial ring stiffness
|
90.92 | ISO/TC 138/SC 6 |
Plastics pipes and fittings — Opacity — Test method
|
95.99 | ISO/TC 138/SC 5 |
Plastics pipes and fittings — Determination of opacity
|
90.93 | ISO/TC 138/SC 5 |
Unplasticized polyamide (PA-U) pipes — Effect of time and temperature on the expected strength
|
40.99 | ISO/TC 138/SC 5 |
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C)
|
90.93 | ISO/TC 138/SC 1 |
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 2: Polyethylene (PE)
|
90.20 | ISO/TC 138/SC 1 |
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 3: Polypropylene (PP)
|
90.93 | ISO/TC 138/SC 1 |
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 4: Acrylonitrile/butadiene/styrene (ABS)
|
90.20 | ISO/TC 138/SC 1 |
Thermoplastics pipes and fittings — Water absorption — Part 1: General test method
|
90.93 | ISO/TC 138/SC 5 |
Thermoplastics pipes and fittings — Water absorption — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings
|
90.93 | ISO/TC 138/SC 5 |
Thermoplastics pipes and fittings — Water absorption — Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings
|
90.93 | ISO/TC 138/SC 5 |
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of bolted flange joints
|
95.99 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of bolted flange joints — Amendment 1
|
95.99 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of bolted flange joints
|
90.60 | ISO/TC 138/SC 6 |
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of longitudinal tensile properties
|
95.99 | ISO/TC 138/SC 6 |
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the apparent initial longitudinal tensile strength
|
95.99 | ISO/TC 138/SC 6 |
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the initial longitudinal tensile strength
|
95.99 | ISO/TC 138/SC 6 |
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the initial longitudinal tensile strength
|
60.60 | ISO/TC 138/SC 6 |
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the apparent initial circumferential tensile strength
|
95.99 | ISO/TC 138/SC 6 |
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the apparent initial circumferential tensile strength
|
95.99 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastic (GRP) pipes — Test methods for the determination of the initial circumferential tensile wall strength
|
60.60 | ISO/TC 138/SC 6 |
Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Test methods to prove the design of cemented or wrapped joints
|
95.99 | ISO/TC 138/SC 6 |
Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Test methods to prove the design of cemented or wrapped joints — Amendment 1
|
95.99 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of cemented or wrapped joints
|
90.60 | ISO/TC 138/SC 6 |
Thermoplastics pipes for industrial applications under pressure — Determination of the chemical resistance factor and of the basic stress — Part 1: Polyolefin pipes
|
95.99 | ISO/TC 138/SC 3 |
Thermoplastics pipes for industrial applications under pressure — Determination of the chemical resistance factor and of the basic stress — Part 2: Pipes made of halogenated polymers
|
95.99 | ISO/TC 138/SC 3 |
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Polyethylene (PE)
|
90.93 | ISO/TC 138/SC 1 |
High-density polyethylene (PE-HD) pipes and fittings for buried drainage and sewerage systems — Specifications
|
95.99 | ISO/TC 138/SC 1 |
Plastics piping systems for non-pressure underground drainage and sewerage — Polyethylene (PE)
|
90.93 | ISO/TC 138/SC 1 |
Polypropylene (PP) pipes and fittings for buried drainage and sewerage systems — Specifications
|
95.99 | ISO/TC 138/SC 1 |
Plastics piping systems for non-pressure underground drainage and sewerage — Polypropylene (PP)
|
90.93 | ISO/TC 138/SC 1 |
Polyethylene (PE) pipes for irrigation laterals — Specifications
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems — Polyethylene (PE) pipes for irrigation — Specifications
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems — Polyethylene (PE) pipes for irrigation — Specifications — Amendment 1
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems — Polyethylene (PE) pipes for irrigation — Specifications
|
60.60 | ISO/TC 138/SC 2 |
Plastics piping systems for the conveyance of water intended for human consumption — Migration assessment — Determination of migration values for plastics pipes
|
95.99 | ISO/TC 138/SC 5 |
Plastics piping systems for the transport of water intended for human consumption — Migration assessment — Determination of migration values of plastics pipes and fittings and their joints
|
90.93 | ISO/TC 138/SC 5 |
Polyethylene PE 32 and PE 40 pipes for irrigation laterals — Susceptibility to environmental stress cracking induced by insert-type fittings — Test method and requirements
|
90.93 | ISO/TC 138/SC 2 |
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics pipes for the transport of fluids — Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics pipes for the transport of fluids — Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials — Technical Corrigendum 1
|
95.99 | ISO/TC 138/SC 5 |
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
|
90.93 | ISO/TC 138/SC 5 |
Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane resistance at specified temperature (DCMT) — Test method
|
95.99 | ISO/TC 138/SC 5 |
Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane resistance at specified temperature (DCMT) — Test method
|
90.93 | ISO/TC 138/SC 5 |
Thermoplastics pipes for the transport of fluids — Determination of pendulum impact strength by the Charpy method — Part 1: General test method
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics pipes for the transport of fluids — Determination of Charpy impact properties — Part 1: General test method
|
60.60 | ISO/TC 138/SC 5 |
Thermoplastics pipes for the transport of fluids — Determination of pendulum impact strength by the Charpy method — Part 2: Test conditions for pipes of various materials
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics pipes for the transport of fluids — Determination of Charpy impact properties — Part 2: Test conditions for pipes of various materials
|
60.60 | ISO/TC 138/SC 5 |
Plastics traps for discharge pipework systems inside buildings
|
90.93 | ISO/TC 138/SC 1 |
Thermoplastics pipes — Determination of creep ratio
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics pipes — Determination of creep ratio
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics pipes — Determination of creep ratio
|
90.93 | ISO/TC 138/SC 5 |
Thermoplastics pipes — Determination of ring stiffness
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics pipes — Determination of ring stiffness
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics pipes — Determination of ring stiffness
|
90.93 | ISO/TC 138/SC 5 |
Crosslinked polyethylene (PE-X) pipes — Effect of time and temperature on the expected strength
|
95.99 | ISO/TC 138/SC 5 |
Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX) — Effect of time and temperature on expected strength
|
90.92 | ISO/TC 138/SC 5 |
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content
|
95.99 | ISO/TC 138/SC 5 |
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content
|
95.99 | ISO/TC 138/SC 5 |
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content — Amendment 1
|
95.99 | ISO/TC 138/SC 5 |
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content
|
90.93 | ISO/TC 138/SC 5 |
Plastics pipes and fittings — Combined chemical-resistance classification table
|
95.99 | ISO/TC 138/SC 3 |
Plastics pipes and fittings for industrial applications — Collection of data on combined chemical-resistance
|
60.60 | ISO/TC 138/SC 3 |
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test method to prove the resistance to initial ring deflection
|
95.99 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastics (GRP) pipes — Test method to prove the resistance to initial ring deflection
|
60.60 | ISO/TC 138/SC 6 |
Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
|
95.99 | ISO/TC 138/SC 6 |
Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Amendment 1
|
95.99 | ISO/TC 138/SC 6 |
Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
|
95.99 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor
|
95.99 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor — Amendment 1
|
95.99 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions
|
95.99 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions
|
60.60 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
|
95.99 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions — Amendment 1
|
95.99 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
|
90.92 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
|
40.20 | ISO/TC 138/SC 6 |
Thermoplastics pipes for the transport of liquids under pressure — Calculation of head losses
|
90.93 | ISO/TC 138/SC 2 |
Thermoplastics pipes and fittings for hot and cold water systems
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Guidance for classification and design
|
90.20 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Guidance for classification and design — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
|
95.99 | ISO/TC 138/SC 6 |
Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Amendment 1
|
95.99 | ISO/TC 138/SC 6 |
Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
|
95.99 | ISO/TC 138/SC 6 |
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use
|
95.99 | ISO/TC 138/SC 6 |
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use
|
95.99 | ISO/TC 138/SC 6 |
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use — Amendment 1
|
95.99 | ISO/TC 138/SC 6 |
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use
|
95.99 | ISO/TC 138/SC 6 |
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use
|
60.60 | ISO/TC 138/SC 6 |
Plastics piping systems for industrial applications — Poly(vinylidene fluoride) (PVDF) — Part 2: Pipes
|
95.99 | ISO/TC 138/SC 3 |
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack from the inside of a section in a deflected condition
|
95.99 | ISO/TC 138/SC 6 |
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack for the inside of a section in a deflected condition
|
95.99 | ISO/TC 138/SC 6 |
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack for the inside of a section in a deflected condition
|
95.99 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack for the inside of a section in a deflected condition
|
60.60 | ISO/TC 138/SC 6 |
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — System design of above ground pipe and joint installations without end thrust
|
90.60 | ISO/TC 138/SC 6 |
Thermoplastics pipes — Determination of resistance to external blows — Staircase method
|
90.93 | ISO/TC 138/SC 5 |
Plastics piping systems used for the rehabilitation of pipelines — Classification and overview of strategic, tactical and operational activities
|
30.99 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 1: General
|
95.99 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 1: General
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 2: Lining with continuous pipes
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes
|
95.99 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes — Technical Corrigendum 1
|
95.99 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes
|
95.99 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes — Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results
|
60.60 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 7: Lining with spirally-wound pipes
|
95.99 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 7: Lining with spirally-wound pipes
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 9: Lining with a rigidly anchored plastics inner layer
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 1: General
|
95.99 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 1: General
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 2: Lining with continuous pipes
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes
|
95.99 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 4: Lining with cured-in-place pipes
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground water supply networks — Part 1: General
|
95.99 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground water supply networks — Part 1: General
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground water supply networks — Part 2: Lining with continuous pipes
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground water supply networks — Part 3: Lining with close-fit pipes
|
95.99 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground water supply networks — Part 3: Lining with close-fit pipes
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground water supply networks — Part 4: Lining with cured-in-place pipes
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground water supply networks — Part 11: Lining with inserted hoses
|
30.60 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground gas supply networks — Part 1: General
|
95.99 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground gas supply networks — Part 1: General
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground gas supply networks — Part 2: Lining with continuous pipes
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground gas supply networks — Part 3: Lining with close-fit pipes
|
95.99 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground gas supply networks — Part 3: Lining with close-fit pipes
|
90.92 | ISO/TC 138/SC 8 |
Piping systems for rehabilitation of underground drains, sewers and water supply networks — Part 1: Polyethylene (PE) material
|
40.00 | ISO/TC 138/SC 8 |
Piping systems for rehabilitation of underground drains, sewers and water supply networks — Part 3: Unplasticized poly (vinyl chloride) (PVC-U) material
|
40.00 | ISO/TC 138/SC 8 |
Piping systems for rehabilitation of underground gas supply networks — Part 1: Polyethylene (PE) material
|
30.60 | ISO/TC 138/SC 8 |
Method for the assessment of the degree of carbon black dispersion in polyolefin pipes, fittings and compounds
|
95.99 | ISO/TC 138/SC 5 |
Pneumatic fluid power — Polyurethane and polyamide tubings for use primarily in pneumatic installations — Dimensions and specification
|
60.60 | ISO/TC 131/SC 4 |
Polyurethane tubing for use primarily in pneumatic installations — Dimensions and specification
|
95.99 | ISO/TC 131/SC 4 |
Fusion compatibility of polyethylene (PE) pipes and fittings
|
95.99 | ISO/TC 138/SC 5 |
Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes — Determination of the fracture toughness properties
|
90.93 | ISO/TC 138/SC 5 |
Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series
|
95.99 | ISO/TC 138 |
Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series
|
90.93 | ISO/TC 138 |
Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 2: Inch-based series
|
90.93 | ISO/TC 138 |
Structured-wall thermoplastics pipes — Oven test
|
90.93 | ISO/TC 138/SC 5 |
Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes under pressure — Resistance to internal pressure — Test method
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics materials for pipes and fittings for pressure applications — Classification and designation — Overall service (design) coefficient
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics materials for pipes and fittings for pressure applications — Classification, designation and design coefficient
|
90.93 | ISO/TC 138/SC 5 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
|
95.99 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
|
95.99 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
|
95.99 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
|
90.93 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion
|
95.99 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion
|
90.92 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion — Amendment 1
|
60.60 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion
|
40.60 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge
|
95.99 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge
|
95.99 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge
|
90.93 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 4: Traceability coding
|
90.93 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 5: Two-dimensional data coding of components and data exchange format for PE piping systems
|
60.60 | ISO/TC 138/SC 4 |
Polybutene (PB) pipes — Effect of time and temperature on the expected strength
|
95.99 | ISO/TC 138/SC 5 |
Polybutene-1 (PB-1) pipes — Effect of time and temperature on the expected strength
|
90.93 | ISO/TC 138/SC 5 |
Glass reinforced thermosetting plastic (GRP) pipes — Determination of initial specific ring stiffness using segment test species cut from a pipe
|
90.93 | ISO/TC 138/SC 6 |
Thermoplastics piping systems for non-pressure applications — Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings — Determination of the viscosity number and K-value
|
90.93 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure applications — Test method for watertightness
|
90.93 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for soil and waste discharge inside buildings — Test method for airtightness of joints
|
90.93 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure applications — Test method for resistance to elevated temperature cycling
|
95.99 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure applications — Test method for resistance to elevated temperature cycling
|
90.93 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints
|
95.99 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints
|
95.99 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints
|
60.60 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Test method for resistance to combined temperature cycling and external loading
|
90.93 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Test method for resistance to combined temperature cycling and external loading — Amendment 1
|
60.60 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics spirally-formed structured-wall pipes — Determination of the tensile strength of a seam
|
90.93 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for impact strength
|
90.93 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for mechanical strength or flexibility of fabricated fittings
|
90.93 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Joints for buried non-pressure applications — Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
|
95.99 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Joints for buried non-pressure applications — Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
|
60.60 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of resistance against surface and traffic loading
|
95.99 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of resistance against surface and traffic loading
|
60.60 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics inspection chamber and manhole bases — Test methods for buckling resistance
|
95.99 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics inspection chamber and manhole bases — Test methods for buckling resistance
|
60.60 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of ring stiffness
|
95.99 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of ring stiffness
|
60.60 | ISO/TC 138/SC 1 |
Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) — Specifications for manholes and inspection chambers in traffic areas and underground installations
|
90.92 | ISO/TC 138/SC 1 |
Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) — Specifications for manholes and inspection chambers in traffic areas and underground installations
|
40.00 | ISO/TC 138/SC 1 |
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test)
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test)
|
90.93 | ISO/TC 138/SC 5 |
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Full-scale test (FST)
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Full-scale test (FST)
|
90.93 | ISO/TC 138/SC 5 |
Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes (notch test)
|
95.99 | ISO/TC 138/SC 5 |
Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes
|
95.99 | ISO/TC 138/SC 5 |
Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes
|
60.60 | ISO/TC 138/SC 5 |
Polyethylene pipes — Resistance to slow crack growth — Cone test method
|
90.93 | ISO/TC 138/SC 5 |
Plastics pipes for the conveyance of fluids under pressure — Miner's rule — Calculation method for cumulative damage
|
90.92 | ISO/TC 138/SC 5 |
Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
|
95.99 | ISO/TC 138/SC 5 |
Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
|
90.93 | ISO/TC 138/SC 5 |
Plastics piping systems — Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes — Test method for leaktightness under negative pressure
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes — Test method for leaktightness under negative pressure, angular deflection and deformation
|
95.99 | ISO/TC 138/SC 5 |
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pipes — Test method for leaktightness under negative pressure, angular deflection and deformation
|
60.60 | ISO/TC 138/SC 5 |
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes — Test method for leaktightness under internal pressure and with angular deflection
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes — Test method for leaktightness under internal pressure and with angular deflection
|
90.93 | ISO/TC 138/SC 5 |
Method for the assessment of the degree of pigment dispersion in polyolefin pipes, fittings and compounds
|
95.99 | ISO/TC 138/SC 5 |
Plastics pipes and fittings — Automatic recognition systems for electrofusion joints
|
90.93 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Automatic recognition systems for electrofusion
|
95.99 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Automatic recognition systems for electrofusion joints — Technical Corrigendum 1
|
60.60 | ISO/TC 138/SC 4 |
Thermoplastics pipes and fittings — Nominal ring stiffnesses
|
90.93 | ISO/TC 138 |
Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility
|
95.99 | ISO/TC 138/SC 5 |
Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility
|
90.93 | ISO/TC 138/SC 5 |
Plastics pipes and fittings — Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems
|
95.99 | ISO/TC 138/SC 2 |
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 1: Pipes
|
90.93 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 2: Fittings for heat-fusion jointing
|
90.93 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
|
95.99 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
|
90.93 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 4: System design and installation guidelines
|
90.93 | ISO/TC 138/SC 4 |
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor
|
95.99 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor — Amendment 1
|
95.99 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the resistance to cyclic internal pressure
|
90.93 | ISO/TC 138/SC 6 |
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the resistance to cyclic internal pressure — Amendment 1
|
60.60 | ISO/TC 138/SC 6 |
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) — Polyamide (PA) — Part 1: General
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) — Polyamide (PA) — Part 2: Pipes
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) — Polyamide (PA) — Part 3: Fittings
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General — Amendment 1
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General
|
90.93 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General — Amendment 1: Impact test
|
60.60 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes — Amendment 1
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes
|
90.93 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes — Amendment 2: Impact test
|
60.60 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system
|
90.93 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes
|
90.92 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes — Amendment 2
|
60.60 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes
|
40.60 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system
|
90.92 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system — Technical Corrigendum 1
|
60.60 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system
|
40.60 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 7: Guidance for the assessment of conformity
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 7: Guidance for the assessment of conformity
|
90.60 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 2: Pipes
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 2: Pipes — Amendment 1
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes
|
90.93 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 5: Fitness for purpose of the system
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system
|
90.93 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polybutylene (PB) — Part 7: Guidance for the assessment of conformity
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 7: Guidance for the assessment of conformity
|
90.60 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General
|
90.20 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes
|
90.20 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes — Amendment 2
|
60.60 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system
|
90.20 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system — Amendment 2
|
60.60 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 7: Guidance for the assessment of conformity
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 7: Guidance for the assessment of conformity
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 7: Guidance for the assessment of conformity
|
90.60 | ISO/TC 138/SC 2 |
Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
|
90.93 | ISO/TC 138/SC 5 |
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 1: General
|
60.60 | ISO/TC 138/SC 2 |
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 2: Pipes
|
60.60 | ISO/TC 138/SC 2 |
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 5: Fitness for purpose of the system
|
60.60 | ISO/TC 138/SC 2 |
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications
|
95.99 | ISO/TC 138/SC 2 |
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications
|
95.99 | ISO/TC 138/SC 2 |
Thermoplastics pipes for the conveyance of fluids — Determination of the slow cracking resistance of pipes and fittings using the Notched Ring Test (NRT)
|
90.93 | ISO/TC 138/SC 5 |
Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, requirements and tests
|
90.92 | ISO/TC 138/SC 6 |
Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, requirements and tests
|
40.60 | ISO/TC 138/SC 6 |
Plastics piping and ducting systems — Plastics pipes and fittings — Method for exposure to direct (natural) weathering
|
90.93 | ISO/TC 138/SC 5 |
Plastics pipes and fittings — Definitions of types of test
|
90.93 | ISO/TC 138/SC 5 |
Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene electrofusion socket joints using phased array ultrasonic testing
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene electrofusion socket joints using phased array ultrasonic testing
|
60.60 | ISO/TC 138/SC 5 |
Plastics piping systems — Multilayer pipes — Test method for the adhesion of the different layers using a pulling rig
|
90.93 | ISO/TC 138/SC 5 |
Plastics piping systems — Multilayer pipes — Determination of the oxygen permeability of the barrier pipe
|
90.93 | ISO/TC 138/SC 5 |
Plastics piping systems — Multilayer pipes — Determination of the oxygen permeability of the barrier pipe — Technical Corrigendum 1
|
60.60 | ISO/TC 138/SC 5 |
Plastics piping systems — Multilayer pipes — Determination of long-term strength
|
90.93 | ISO/TC 138/SC 5 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems jointed by solvent cement — Part 1: General
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems jointed by solvent cement — Part 2: Pipes
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems jointed by solvent cement — Part 3: Fittings
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems — Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) — Part 1: Specifications for systems
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems — Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) — Part 1: Specifications for systems — Technical Corrigendum 1
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems — Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) — Part 1: Specifications for systems
|
90.20 | ISO/TC 138/SC 4 |
Plastics piping systems — Multilayer pipe systems for indoor gas installations — Part 2: Code of pratice
|
90.20 | ISO/TC 138/SC 4 |
Plastics piping systems — Fittings, valves and ancillaries — Determination of gaseous flow rate/pressure drop relationships
|
90.93 | ISO/TC 138/SC 5 |
Wrapped electrofoaming joints for polyethylene (PE) piping systems with smooth outer wall for gravity drains and sewers
|
90.93 | ISO/TC 138/SC 1 |
Plastics piping systems — Multilayer M (metal) pipes — Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone
|
90.93 | ISO/TC 138/SC 5 |
Plastics piping systems — Multilayer piping systems for outdoor gas installations — Specifications for systems
|
95.99 | ISO/TC 138/SC 4 |
Plastics piping systems — Multilayer piping systems for outdoor gas installations — Specifications for systems
|
90.93 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)
|
90.60 | ISO/TC 138/SC 4 |
Rigid PVC pipes — Differential scanning calorimetry (DSC) method — Part 1: Measurement of the processing temperature
|
90.93 | ISO/TC 138/SC 5 |
Rigid PVC pipes — Differential scanning calorimetry (DSC) method — Part 2: Measurement of the enthalpy of fusion of crystallites
|
90.93 | ISO/TC 138/SC 5 |
Polyethylene (PE) materials for piping systems — Determination of Strain Hardening Modulus in relation to slow crack growth — Test method
|
90.92 | ISO/TC 138/SC 5 |
Polyethylene (PE) materials for piping systems — Determination of Strain Hardening Modulus in relation to slow crack growth — Test method
|
40.20 | ISO/TC 138/SC 5 |
Polyethylene (PE) materials for piping systems — Determination of resistance to slow crack growth under cyclic loading — Cracked Round Bar test method
|
90.92 | ISO/TC 138/SC 5 |
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
|
90.92 | ISO/TC 138/SC 5 |
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds — Amendment 1
|
60.60 | ISO/TC 138/SC 5 |
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
|
50.20 | ISO/TC 138/SC 5 |
Plastics piping systems for non-pressure drainage and sewerage — Polyester resin concrete (PRC) — Part 1: Pipes and fittings with flexible joints
|
90.93 | ISO/TC 138/SC 6 |
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test method to prove the structural design of fittings
|
90.93 | ISO/TC 138/SC 6 |
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Styrene copolymer blends (SAN + PVC)
|
95.99 | ISO/TC 138/SC 1 |
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Styrene copolymer blends (SAN + PVC)
|
60.60 | ISO/TC 138/SC 1 |
Polyethylene pipes and fittings for the supply of gaseous fuels or water — Training and assessment of fusion operators
|
90.92 | ISO/TC 138/SC 4 |
Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of mounted assemblies to temperature cycling
|
90.93 | ISO/TC 138/SC 5 |
Plastics piping systems — Polyolefin pipes and mechanical fitting assemblies — Test method for the resistance to end load (AREL test)
|
90.93 | ISO/TC 138/SC 5 |
Plastics piping systems — General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes — Part 1: Buried pipes
|
90.93 | ISO/TC 138/SC 6 |
Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes
|
90.93 | ISO/TC 138/SC 2 |
Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity
|
95.99 | ISO/TC 138/SC 2 |
Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity — Amendment 1
|
95.99 | ISO/TC 138/SC 2 |
Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity
|
90.93 | ISO/TC 138/SC 2 |
Plastics piping systems — Multilayer pipes and their joints, based on thermoplastics, for water supply
|
90.93 | ISO/TC 138/SC 2 |
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 1: Material specifications and performance criteria for pipes, fittings and system
|
95.99 | ISO/TC 138/SC 1 |
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 1: Material specification and performance criteria for pipes, fittings and systems
|
60.60 | ISO/TC 138/SC 1 |
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 2: Pipes and fittings with smooth external surface, Type A
|
95.99 | ISO/TC 138/SC 1 |
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 2: Pipes and fittings with smooth external surface, Type A
|
60.60 | ISO/TC 138/SC 1 |
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 3: Pipes and fittings with non-smooth external surface, Type B
|
95.99 | ISO/TC 138/SC 1 |
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 3: Pipes and fittings with non-smooth external surface, Type B
|
60.60 | ISO/TC 138/SC 1 |
Plastics piping systems for the trenchless replacement of underground pipeline networks — Part 1: Replacement on the line by pipe bursting and pipe extraction
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for the trenchless replacement of underground pipeline networks — Part 2: Replacement off the line by horizontal directional drilling and impact moling
|
90.92 | ISO/TC 138/SC 8 |
Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
|
95.99 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
|
95.99 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) piping systems
|
90.93 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) piping systems — Amendment 1
|
60.60 | ISO/TC 138/SC 4 |
Plastics pipes and fittings — Decohesion test of electrofusion assemblies — Strip-bend test
|
90.93 | ISO/TC 138/SC 5 |
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes
|
95.99 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes
|
90.20 | ISO/TC 138/SC 2 |
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes — Amendment 1
|
60.60 | ISO/TC 138/SC 2 |
Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using phased array ultrasonic testing
|
95.99 | ISO/TC 138/SC 5 |
Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using phased array ultrasonic testing
|
60.60 | ISO/TC 138/SC 5 |
Thermoplastics pipes for the conveyance of fluids — Determination of the stress-rupture resistance of moulding materials using plain strain grooved tensile (PSGT) specimens
|
90.93 | ISO/TC 138/SC 5 |
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines — Part 1: Polyethylene (PE) material
|
90.92 | ISO/TC 138/SC 8 |
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines — Part 2: Resin-fibre composite (RFC) material
|
90.92 | ISO/TC 138/SC 8 |
Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines — Part 3: Unplasticised poly(vinyl chloride) (PVC-U) material
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
|
60.60 | ISO/TC 138/SC 6 |
Plastics — Application of spread of flame test to plastic pipes
|
60.60 | ISO/TC 61/SC 4 |
Pipes made of raised-temperature-resistance polyethylene (PE-RT) — Effect of time and temperature on the expected strength
|
95.99 | ISO/TC 138/SC 5 |
Polyethylene of raised temperature resistance (PE-RT) pipes — Effect of time and temperature on the expected strength
|
90.92 | ISO/TC 138/SC 5 |
Polyethylene of raised temperature resistance (PE-RT) pipes — Effect of time and temperature on the expected strength
|
40.60 | ISO/TC 138/SC 5 |
Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using time of flight diffraction testing
|
50.20 | ISO/TC 138/SC 5 |
Glass reinforced thermosetting plastic (GRP) pipes — Test method for determination of long-term pressure endurance strength
|
40.00 | ISO/TC 138/SC 6 |
Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Pipes with flexible joints intended to be installed using jacking techniques
|
90.92 | ISO/TC 138/SC 6 |
Plastics pipes and fittings — Definition and construction procedures for reference lines
|
90.93 | ISO/TC 138/SC 5 |
Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes
|
90.93 | ISO/TC 138/SC 2 |
No matching records found. Please try changing the filter settings.