Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread — Technical Corrigendum 1

Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners not under tensile stresses

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners with specified hardness classes — Coarse thread and fine pitch thread

Mechanical properties of fasteners — Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm

Fasteners — Mechanical properties of fasteners made of carbon steel and alloy steel — Part 11: Bolts, screws and studs with diameters above 39 mm and up to 100 mm and specified property classes

Slotted cheese head screws — Product grade A

Slotted cheese head screws — Product grade A

Slotted pan head screws — Product grade A

Slotted pan head screws — Product grade A

Slotted countersunk flat head screws (common head style) — Product grade A

Slotted countersunk flat head screws — Product grade A

Countersunk slotted raised head screws (common head style) — Product grade A

Slotted raised countersunk head screws — Product grade A

Slotted headless screws with shank

Threaded fasteners — Axial load fatigue testing — Test methods and evaluation of results

Hexagon head bolts — Product grades A and B

Hexagon head bolts — Product grades A and B

Fasteners — Hexagon head bolts — Product grades A and B

Hexagon head bolts — Product grade B — Reduced shank (shank diameter approximately equal to pitch diameter)

Fasteners — Hexagon head bolts with reduced shank (shank diameter ≈ pitch diameter) — Product grade B

Hexagon head bolts — Product grade C

Hexagon head bolts — Product grade C

Fasteners — Hexagon head bolts — Product grade C

Hexagon head screws — Product grades A and B

Hexagon head screws — Product grades A and B

Fasteners — Hexagon head screws — Product grades A and B

Fasteners — Hexagon head screws — Product grades A and B

Hexagon head screws — Product grade C

Hexagon head screws — Product grade C

Fasteners — Hexagon head screws — Product grade C

Hexagon socket set screws with flat point

Hexagon socket set screws with flat point

Hexagon socket set screws with cone point

Hexagon socket set screws with cone point

Hexagon socket set screws with dog point

Hexagon socket set screws with dog point

Hexagon socket set screws with cup point

Hexagon socket set screws with cup point

Hexagon flange bolts — Small series

Hexagon bolts with flange — Small series — Product grade A with driving feature of product grade B

Hexagon socket head cap screws

Slotted set screws with flat point

Slotted set screws with flat point

Fasteners — Slotted set screws with flat point

Pan head screws with type H or type Z cross recess — Product grade A

Pan head screws with type H or type Z cross recess — Product grade A

Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 1: Steel of property class 4.8

Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 1: Steel screws of property class 4.8

Cross-recessed countersunk flat head screws (common head style) — Grade A — Part 2: Steel of property class 8.8, stainless steel and non-ferrous metals

Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws

Countersunk raised head screws (common head style) with type H or type Z cross recess — Product grade A

Raised countersunk head screws (common head style) with type H or type Z cross recess — Product grade A

Cross recessed cheese head screws

Cross-recessed cheese head screws

Hexagon socket head shoulder screws

Button head screws — Part 1: Hexagon socket button head screws

Fasteners — Button head screws with reduced loadability — Part 1: Hexagon socket button head screws

Button head screws — Part 2: Hexagon socket button head screws with collar

Fasteners — Button head screws with reduced loadability — Part 2: Hexagon socket button head screws with collar

Fasteners — Button head screws with reduced loadability — Part 3: Hexalobular socket button head screws

Fasteners — Button head screws with reduced loadability — Part 4: Hexalobular socket button head screws with collar

Hexagon socket button head screws

Plain washers for high-strength structural bolting, hardened and tempered

Slotted set screws with cone point

Fasteners — Slotted set screws with cone point

Slotted set screws with long dog point

Fasteners — Slotted set screws with dog point

Slotted set screws with cup point

Fasteners — Slotted set screws with cup point

Countersunk flat head screws — Part 2: Penetration depth of cross recesses

Countersunk head screws — Head configuration and gauging

Hexagon head screws with metric fine pitch thread — Product grades A and B

Hexagon head screws with metric fine pitch thread — Product grades A and B

Fasteners — Hexagon head screws, with fine pitch thread — Product grades A and B

Cup head square neck bolts with small head and short neck — Product grade B

Hexagon head bolts with metric fine pitch thread — Product grades A and B

Hexagon head bolts with metric fine pitch thread — Product grades A and B

Fasteners — Hexagon head bolts, with fine pitch thread — Product grades A and B

Mechanical properties of fasteners — Bolts, screws, studs and nuts made of non-ferrous metals

Hexagon socket countersunk head screws

Hexagon socket countersunk head screws — Amendment 1

Fasteners — Hexagon socket countersunk head screws with reduced loadability

Screw and washer assemblies with plain washers — Washer hardness classes 200 HV and 300 HV

Screw and washer assemblies made of steel with plain washers — Washer hardness classes 200 HV and 300 HV

Hexalobular internal driving feature for bolts and screws

Hexalobular internal driving feature for bolts and screws

Plain washers for screw and washer assemblies — Small, normal and large series — Product grade A

Plain washers for screw and washer assemblies — Small, normal and large series — Product grade A

Hexagon socket head cap screws with metric fine pitch thread

Fasteners — Hexalobular socket set screws

Hexalobular socket head cap screws

Hexalobular socket head cap screws

Hexalobular socket cheese head screws

Hexalobular socket cheese head screws — Technical Corrigendum 1

Hexalobular socket cheese head screws

Fasteners — Hexalobular socket countersunk flat head screws

Fasteners — Hexalobular socket countersunk flat head screws (common head style) with reduced loadability

Fasteners — Hexalobular socket countersunk head screws, high head

Hexalobular socket pan head screws

Hexalobular socket pan head screws

Hexalobular socket raised countersunk head screws

Hexalobular socket raised countersunk head screws

Hexagon bolts with flange — Small series — Product grade A

Hexagon bolts with flange — Small series — Product grade A

Hexagon bolts with flange with metric fine pitch thread — Small series — Product grade A

Hexagon bolts with flange with metric fine pitch thread — Small series — Product grade A — Technical Corrigendum 1

Hexagon bolts with flange with metric fine pitch thread — Small series — Product grade A

Fasteners — Torque/clamp force testing — Part 1: Test method for acceptance inspection

Fasteners — Torque/clamp force testing — Part 2: Test methods under practical or particular conditions

Fasteners — Torque/clamp force testing

Fasteners — Torque/clamp force testing — Amendment 1

Gauging of hexagon sockets

Fasteners — Stress area of ISO metric fasteners