ISO 4498:2010

No disponible en español

Publicado (Edición 2, 2010)

Esta publicación se revisó y confirmó por última vez en 2020. Por lo tanto, esta versión es la actual.

ISO 4498:2010

CHF 63

Convertir Franco suizo (CHF) a tu moneda

Resumen

ISO 4498:2010 specifies methods of hardness testing of sintered metal materials, excluding hardmetals.

Procedure 1 determines the apparent hardness of the whole material.

Procedure 1

applies to sintered metal materials which have either not been subjected to any heat treatment, or which have been heat treated in such a way that the hardness is essentially uniform to a depth of at least 5 mm below the surface,
applies to the surfaces of sintered metal materials which have been treated in such a way that the hardness is not uniform in the section to a depth of 5 mm below the surface,
therefore applies to materials in which the hardness is obtained essentially by surface enrichment by carbon, or by carbon and nitrogen (for example, by carburizing, carbonitriding, nitrocarburizing or sulphidizing), and
applies to materials which have been induction hardened.

Procedure 2 determines the microhardness of the metal phase.

Procedure 2

applies to all types of sintered metal materials,
is used, in particular, to determine the hardness profile of case‑hardened or carbonitrided materials in accordance with the method described in ISO 4507, and

also applies to any sintered metallic materials which have been subjected to surface treatments such as electrodeposited plating, chemical coating, chemical vapour deposition (CVD), physical vapour deposition (PVD), laser, ion bombardment, etc. To determine the microhardness of treated surfaces, Procedure 2 applies.

Informaciones generales

Estado
: Publicado

Fecha de publicación
: 2010-06

Etapa
: Norma Internacional confirmada [90.93]
Edición
: 2

Número de páginas
: 12
Comité Técnico :
ISO/TC 119/SC 3

ICS :
77.160 77.040.10
RSS actualizaciones