Reference number
ISO 18917:1999
International Standard
ISO 18917:1999
Photography — Determination of residual thiosulfate and other related chemicals in processed photographic materials — Methods using iodine-amylose, methylene blue and silver sulfide
Edition 1
1999-06
Preview
ISO 18917:1999
28235
Indisponible en français
Publiée (Edition 1, 1999)
Cette publication a été révisée et confirmée pour la dernière fois en 2021. Cette édition reste donc d’actualité.

ISO 18917:1999

ISO 18917:1999
28235
Langue
Format
CHF 129
Convertir les francs suisses (CHF) dans une autre devise

Résumé

1.1 This International Standard specifies test methods for the determination of residual thiosulfate and other

related chemicals in processed photographic materials.

1.2 This International Standard applies to silver halide/gelatin products that have been processed with a final

thiosulfate fixing bath and a water wash. This International Standard does not apply to stabilised black-and-white

products, thermally processed films, or instant-type products. The procedures given in this International Standard

measure residual thiosulfate, and the silver densitometric method measures residual related polythionate materials

as well. Measurements carried out by the procedures in this International Standard may, within the limitations stated

in annexes A and B, correlate with the image stabilities of processed photographs.

1.3 Film or plates with photographic-sensitive layers on both sides, or with a photographic sensitive layer on one

side and a gelatin backing layer on the reverse side, may contain approximately twice as much thiosulfate after

processing as samples having a coating on one side only. This situation will be true for materials for which residual

thiosulfate is determined by the iodine-amylose or methylene blue procedures.

NOTE For the method of reporting such results, see figure 1, example 2.

1.4 The iodine-amylose can be used with fibre-based paper, resin-coated paper, films and plates. It is the method

to be used with films and papers containing incorporated developing agents.

1.5 The methylene blue method can be used with fibre-based paper, resin-coated paper, films and plates but not

with films and paper containing incorporated developing agents.

1.6 The silver sulfide densitometric method measures thiosulfates, polythionates and all other residual chemicals

in a processed product that react with silver ion to form a silver "stain" under the conditions of the test.

1.7 A tabulated summary of methods, scope, etc. is given in annex B.

Informations générales

  •  : Publiée
     : 1999-06
    : Norme internationale confirmée [90.93]
  •  : 1
  • ISO/TC 42
    37.040.20 
  • RSS mises à jour

Cycle de vie

Vous avez une question?

Consulter notre Aide et assistance