Reference number
ISO 16505:2019
International Standard
ISO 16505:2019
Road vehicles — Ergonomic and performance aspects of Camera Monitor Systems — Requirements and test procedures
Edition 2
2019-07
Preview
ISO 16505:2019
72000
Indisponible en français
Publiée (Edition 2, 2019)
Cette norme comprend 1 amendement.

ISO 16505:2019

ISO 16505:2019
72000
Langue
Format
CHF 216
Convertir les francs suisses (CHF) dans une autre devise

Résumé

This document gives minimum safety, ergonomic, and performance requirements for Camera Monitor Systems to replace mandatory inside and outside rearview mirrors for road vehicles (e.g. classes I to IV as defined in UN Regulation No. 46). It addresses Camera Monitor Systems (CMS) that will be used in road vehicles to present the required outside information of a specific field of view inside the vehicle. These specifications are intended to be independent of different camera and display technologies unless otherwise stated explicitly. Advanced driver assistance systems (ADAS), such as parking aids, are not part of this document.

NOTE 1 Mirror classes V and VI (as defined in UN Regulation No. 46) are not in scope of this document since the requirements are already defined in UN Regulation No. 46.

NOTE 2 The definitions and requirements in this document are formulated with regard to a system structure, where one camera captures one legally prescribed field of view and one monitor displays one legally prescribed field of view. Of course, also other system structures (e.g. with one monitor displaying two legally prescribed fields of view) are within the scope of this document. For those systems, either the system supplier or the vehicle manufacturer has to prove that the resulting system fulfils the requirements given in Clause 6.

NOTE 3 Whenever the phrases "field of view" or "field of vision" are used, then both have the same meaning and are to be used in parallel.

Informations générales

  •  : Publiée
     : 2019-07
    : Norme internationale en cours d'examen systématique [90.20]
  •  : 2
  • ISO/TC 22/SC 35
    13.180  43.040.10 
  • RSS mises à jour

 Amendements

Des amendements sont publiés lorsqu’il s’avère que de nouveaux éléments doivent être ajoutés à un document normatif existant. Ils peuvent également inclure des corrections d’ordre rédactionnel ou technique à appliquer au document en vigueur.

Amendement 1

ORP, FeV, MTF10MIN(1:1)/hor, MTF10MIN(1:1)/ver

Edition 2021

ISO 16505:2019/Amd 1:2021
79475
Langue
Format
CHF 18
Convertir les francs suisses (CHF) dans une autre devise

Vous avez une question?

Consulter notre Aide et assistance