Résumé
This document describes the following:
- polling for proximity cards or objects (PICCs) entering the field of a proximity coupling device (PCD);
- the byte format, the frames and timing used during the initial phase of communication between PCDs and PICCs;
- the initial Request and Answer to Request command content;
- methods to detect and communicate with one PICC among several PICCs (anticollision);
- other parameters required to initialize communications between a PICC and PCD;
- optional means to ease and speed up the selection of one PICC among several PICCs based on application criteria;
- optional capability to allow a device to alternate between the functions of a PICC and a PCD to communicate with a PCD or a PICC, respectively. A device which implements this capability is called a PXD.
Protocol and commands used by higher layers and by applications and which are used after the initial phase are described in ISO/IEC 14443‑4.
This document is applicable to PICCs of Type A and of Type B (as described in ISO/IEC 14443‑2), to PCDs (as described in ISO/IEC 14443‑2) and to PXDs.
NOTE 1 Part of the timing of data communication is defined in ISO/IEC 14443‑2.
NOTE 2 Test methods for this document are defined in ISO/IEC 10373‑6.
Informations générales
-
État actuel: PubliéeDate de publication: 2018-07Stade: Norme internationale publiée [60.60]
-
Edition: 4
-
Comité technique :ISO/IEC JTC 1/SC 17ICS :35.240.15
- RSS mises à jour
Amendements
Des amendements sont publiés lorsqu’il s’avère que de nouveaux éléments doivent être ajoutés à un document normatif existant. Ils peuvent également inclure des corrections d’ordre rédactionnel ou technique à appliquer au document en vigueur.
Cycle de vie
-
Précédemment
AnnuléeISO/IEC 14443-3:2016
-
Actuellement
-
00
Préliminaire
-
10
Proposition
-
20
Préparation
-
30
Comité
-
40
Enquête
-
50
Approbation
-
60
Publication
-
90
Examen
-
95
Annulation
Amendements
Proposent un contenu additionnel; disponibles à l’achat; non inclus dans le texte de la norme en vigueur.AnnuléeISO/IEC 14443-3:2018/Amd 1:2021
PubliéeISO/IEC 14443-3:2018/Amd 2:2020
SuppriméeISO/IEC 14443-3:2018/WD Amd 3
-
00