Reference number
ISO 11003-2:2019
International Standard
ISO 11003-2:2019
Adhesives — Determination of shear behaviour of structural adhesives — Part 2: Tensile test method using thick adherends
Edition 3
2019-06
Preview
ISO 11003-2:2019
75590
Indisponible en français
Publiée (Edition 3, 2019)

ISO 11003-2:2019

ISO 11003-2:2019
75590
Langue
Format
CHF 96
Convertir les francs suisses (CHF) dans une autre devise

Résumé

This document specifies a test method for determining the shear behaviour of an adhesive in a single lap joint bonded assembly when subjected to a tensile force.

The test is performed on specimens consisting of thick, rigid adherends, with a short length of overlap, in order to obtain the most uniform distribution of shear stresses possible and to minimize other stress states which initiate failure.

This test method may be used to determine:

— the shear-stress against shear-strain curve to failure of the adhesive;

— the shear modulus of the adhesive;

— other adhesive properties that can be derived from the stress/strain curve such as secant shear modulus and maximum shear stress;

— the effect of temperature, environment, test speed, etc., on these properties.

This document does not apply in case of adhesion failure.

Informations générales

  •  : Publiée
     : 2019-06
    : Clôture de l'examen [90.60]
  •  : 3
  • ISO/TC 61/SC 11
    83.180 
  • RSS mises à jour

Vous avez une question?

Consulter notre Aide et assistance