Подкомитет | Заголовок подкомитета | Опубликованные стандарты | Стандарты, находящиеся на стадии разработки |
---|---|---|---|
ISO/TC 39/SC 2 | Test conditions for metal cutting machine tools | 70 | 3 |
ISO/TC 39/SC 4 | Woodworking machines | 19 | 7 |
ISO/TC 39/SC 6 | Noise of machine tools | 3 | 0 |
ISO/TC 39/SC 8 | Work holding spindles and chucks | 11 | 0 |
ISO/TC 39/SC 10 | Safety | 11 | 3 |
Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 39 Секретариата | Этап | ICS |
---|---|---|
Machine tools — Lathe tool posts — Overall internal height
|
95.99 | |
Machine tools — Speeds and feeds
|
90.93 | |
Machine tool test code
|
95.99 | |
Machine tools — Self-holding tapers for tool shanks
|
95.99 | |
7/24 tapers for tool shanks for manual changing
|
95.99 | |
Machine tools — Lathe centres — Sizes for interchangeability
|
90.93 | |
Machine tool tables — T-slots and corresponding bolts
|
95.99 | |
Machine tool tables — T-slots and corresponding bolts
|
90.93 | |
Machine tools — Symbols for indications appearing on machine tools
|
90.93 | |
Symbols for indications appearing on machine tools
|
95.99 | |
Machine tools — Direction of operation of controls
|
95.99 | |
Machine tools — Direction of operation of controls
|
90.93 | |
Machine tools — Spindle noses and face plates — Sizes for interchangeability — Part 1: Type A
|
95.99 | |
Withdrawal of ISO/R 867-1968
|
95.99 | |
Test conditions for milling machines with table of variable height, with horizontal or vertical spindle — Testing of the accuracy — Addendum 1: Annex — Universal milling machines with a swivelling table
|
95.99 | |
Test conditions for milling machines with table of variable height, with horizontal or vertical spindle — Testing of the accuracy — Amendment 1
|
95.99 | |
Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of accuracy
|
95.99 | |
Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table — Testing of accuracy
|
95.99 | |
Test conditions for internal cylindrical grinding machines with horizontal spindle — Testing of accuracy
|
95.99 | |
Test conditions for internal cylindrical grinding machines with horizontal spindle — Testing of accuracy — Addendum 1
|
95.99 | |
Test conditions for external cylindrical grinding machines with a movable table — Testing of accuracy
|
95.99 | |
Modular units for machine tool construction — Slide units
|
90.93 | |
Modular units for machine tool construction — Slide units — Amendment 1
|
60.60 | |
Modular units for machine tool construction — Headstocks
|
90.93 | |
Modular units for machine tool construction — Wing bases for slide units
|
90.93 | |
Modular units for machine tool construction — Centre bases and columns
|
90.93 | |
Modular units for machine tool construction — Spindle noses and adjustable adaptors for multi-spindle heads
|
95.99 | |
Modular units for machine tool construction — Spindle noses and adjustable adaptors for multi-spindle heads
|
90.93 | |
Modular units for machine tool construction — Multi-spindle heads — Casing and input drive shaft dimensions
|
90.93 | |
Modular units for machine tool construction — Multi-spindle heads — Casing and input drive shaft dimensions — Amendment 1
|
60.60 | |
Modular units for machine tool construction — Wing base for columns
|
90.93 | |
Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 1: Table type machines
|
95.99 | |
Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 1: Table type machines — Addendum 1
|
95.99 | |
Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 2: Floor type machines
|
95.99 | |
Modular units for machine tool construction — Rotary tables and multi-sided centre bases for rotary tables
|
90.93 | |
Ball screws — Part 1: Vocabulary and designation
|
95.99 | |
Ball screws — Part 1: Vocabulary and designation
|
90.93 | |
Ball screws — Part 2: Nominal diameters and nominal leads — Metric series
|
95.99 | |
Ball screws — Part 2: Nominal diameters, leads, nut dimensions and mounting bolts — Metric series
|
60.60 | |
Ball screws — Part 3: Acceptance conditions and acceptance tests
|
95.99 | |
Ball screws — Part 3: Acceptance conditions and acceptance tests
|
90.93 | |
Ball screws — Part 4: Static axial rigidity
|
90.93 | |
Ball screws — Part 5: Static and dynamic axial load ratings and operational life
|
90.93 | |
Ball screws — Nominal diameters and basic leads — Metric and inch series
|
95.99 | |
Self-centring chucks for machine tools with two-piece jaws (tongue and groove type) — Sizes for interchangeability and acceptance test specifications
|
95.99 | |
Modular units for machine tool construction — Tenon drive and flanges for mounting multi- spindle heads
|
90.93 | |
Modular units for machine tool construction — Integral way columns
|
90.93 | |
Modular units for machine tool construction — Integral way columns — Amendment 1
|
60.60 | |
Modular units for machine tool construction — Spindle units
|
90.93 | |
Modular units for machine tool construction — Support brackets
|
90.93 | |
Test conditions for vertical turning and boring lathes with one or two columns — Testing of the accuracy — Part 0: General introduction
|
95.99 | |
Test conditions for vertical turning and boring lathes with one or two columns — Testing of the accuracy — Part 1: Lathes with a single fixed or movable table
|
95.99 | |
Conditions of acceptance for external cylindrical centreless grinding machines — Testing of the accuracy
|
95.99 | |
Modular units for machine tool construction — Integral way columns — Floor-mounted type
|
90.93 | |
Modular units for machine tool construction — Integral way columns — Floor-mounted type — Amendment 1
|
60.60 | |
Test conditions for surface grinding machines with two columns — Machines for grinding slideways — Testing of accuracy
|
95.99 | |
Machine tools — Presentation of lubrication instructions
|
90.93 | |
Machine tools — Lubrication systems
|
90.93 | |
Test conditions of mechanical dividing heads for machine tools — Testing of the accuracy
|
95.99 | |
Open front mechanical power presses — Capacity ratings and dimensions
|
90.93 | |
Acceptance conditions of open front mechanical power presses — Testing of the accuracy
|
90.93 | |
Modular units for machine tools — Workholding pallets — Part 1: Workholding pallets up to 800 mm nominal size
|
90.93 | |
Modular units for machine tools — Workholding pallets — Part 2: Workholding pallets of nominal size greater than 800 mm
|
90.93 | |
Modular units for machine tools — Workholding pallets — Part 2: Workholding pallets of nominal size greater than 800 mm — Technical Corrigendum 1
|
60.60 | |
Open front mechanical power presses — Vocabulary
|
90.93 | |
Machine tools — Straight-sided single-action mechanical power presses from 400 kN up to and including 4 000 kN nominal force — Characteristics and dimensions
|
90.93 | |
Machine tools — Straight-sided high-speed mechanical power presses from 250 kN up to and including 4 000 kN nominal force — Characteristics and dimensions
|
90.93 | |
Machine tools — Environmental evaluation of machine tools — Part 1: Design methodology for energy-efficient machine tools
|
95.99 | |
Machine tools — Environmental evaluation of machine tools — Part 1: Design methodology for energy-efficient machine tools
|
90.93 | |
Machine tools — Environmental evaluation of machine tools — Part 2: Methods for measuring energy supplied to machine tools and machine tool components
|
90.93 | |
Machine tools — Environmental evaluation of machine tools — Part 3: Principles for testing metal-cutting machine tools with respect to energy efficiency
|
60.60 | |
Machine tools — Environmental evaluation of machine tools — Part 4: Principles for measuring metal-forming machine tools and laser processing machine tools with respect to energy efficiency
|
90.20 | |
Machine tools — Environmental evaluation of machine tools — Part 5: Principles for testing woodworking machine tools with respect to energy supplied
|
60.60 | |
Machine tools — Ball splines — Part 1: General characteristics and requirements
|
90.93 | |
Machine tools — Ball splines — Part 2: Dynamic and static load ratings and rating life
|
90.93 | |
Production equipment for microsystems — Interface between end effector and handling system
|
90.93 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.