Rotating tools with parallel shanks — Diameters of shanks and sizes of driving squares

Application of carbides for machining by chip removal — Designation of the main groups of chip removal and groups of application

Application of hard cutting materials for machining by chip removal — Designation of the main groups of chip removal and groups of application

Application of hard cutting materials for machining by chip removal — Designation of the main groups of chip removal and groups of application — Technical Corrigendum 1

Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application

Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application

Withdrawal of ISO/R 524-1966

Short machine taps and hand taps — Amendment 1

Indexable (throwaway) carbide inserts without fixation hole — Dimensions

Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions

Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions

Indexable inserts for cutting tools — Designation

Indexable inserts for cutting tools — Designation

Indexable inserts for cutting tools — Designation — Amendment 1: Tolerance on d and m of V-shape inserts

Indexable inserts for cutting tools — Designation

Indexable inserts for cutting tools — Designation — Technical Corrigendum 1

Indexable inserts for cutting tools — Designation

Indexable inserts for cutting tools — Designation

Tool shanks and equipment with 7/24 tapers — Collar dimensions

Basic quantities in cutting and grinding — Part 1: Geometry of the active part of cutting tools — General terms, reference systems, tool and working angles, chip breakers

Basic quantities in cutting and grinding — Part 1: Geometry of the active part of cutting tools — General terms, reference systems, tool and working angles, chip breakers — Amendment 1

Basic quantities in cutting and grinding — Part 2: Geometry of the active part of cutting tools — General conversion formulae to relate tool and working angles

Basic quantities in cutting and grinding — Part 3: Geometric and kinematic quantities in cutting

Basic quantities in cutting and grinding — Part 4: Forces, energy, power

Basic quantities in cutting and grinding — Part 5: Basic terminology for grinding processes using grinding wheels

Single point cutting tools — Corner radii

Single point cutting tools — Corner radii

Indexable (throwaway) carbide inserts with cylindrical fixation hole — Dimensions

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions

Indexable (throwaway) carbide inserts for milling cutters — Dimensions — Part 1: Square inserts

Indexable (throwaway) hardmetal inserts for milling cutters — Dimensions — Part 2: Triangular inserts

Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions

Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions

Parallel shank tools — Driving tenons and sockets — Dimensions

Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions

Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions

Tool holders with rectangular shank for indexable inserts — Part 2: Style A

Tool holders with rectangular shank for indexable inserts — Part 2: Style A

Tool holders with rectangular shank for indexable inserts — Part 3: Style B

Tool holders with rectangular shank for indexable inserts — Part 3: Style B

Tool holders with rectangular shank for indexable inserts — Part 4: Style D

Tool holders with rectangular shank for indexable inserts — Part 4: Style D

Tool holders with rectangular shank for indexable inserts — Part 5: Style F

Tool holders with rectangular shank for indexable inserts — Part 5: Style F

Tool holders with rectangular shank for indexable inserts — Part 6: Style G

Tool holders with rectangular shank for indexable inserts — Part 6: Style G

Tool holders with rectangular shank for indexable inserts — Part 7: Style J

Tool holders with rectangular shank for indexable inserts — Part 7: Style J

Tool holders with rectangular shank for indexable inserts — Part 8: Style K

Tool holders with rectangular shank for indexable inserts — Part 8: Style K

Tool holders with rectangular shank for indexable inserts — Part 9: Style L

Tool holders with rectangular shank for indexable inserts — Part 9: Style L

Tool holders with rectangular shank for indexable inserts — Part 10: Style N

Tool holders with rectangular shank for indexable inserts — Part 10: Style N

Tool holders with rectangular shank for indexable inserts — Part 11: Style R

Tool holders with rectangular shank for indexable inserts — Part 11: Style R

Tool holders with rectangular shank for indexable inserts — Part 12: Style S

Tool holders with rectangular shank for indexable inserts — Part 12: Style S

Tool holders with rectangular shank for indexable inserts — Part 13: Style T

Tool holders with rectangular shank for indexable inserts — Part 13: Style T

Tool holders with rectangular shank for indexable inserts — Part 14: Style H

Tool holders with rectangular shank for indexable inserts — Part 14: Style H

Tool holders with rectangular shank for indexable inserts — Part 15: Style V

Tool holders with rectangular shank for indexable inserts — Part 15: Style V

Cartridges, type A, for indexable inserts — Part 1: General survey, correlation and determination of dimensions

Cartridges, type A, for indexable inserts — Part 2: Style F

Cartridges, type A, for indexable inserts — Part 3: Style G

Cartridges, type A, for indexable inserts — Part 4: Style J

Cartridges, type A, for indexable inserts — Part 5: Style K

Cartridges, type A, for indexable inserts — Part 6: Style L

Cartridges, type A, for indexable inserts — Part 7: Style R

Cartridges, type A, for indexable inserts — Part 8: Style S

Cartridges, type A, for indexable inserts — Part 9: Style T

Cartridges, type A, for indexable inserts — Part 10: Style U

Cartridges, type A, for indexable inserts — Part 11: Style W

Cartridges, type A, for indexable inserts — Part 12: Style Y

Cartridges, type A, for indexable inserts — Dimensions

Cartridges, type A, for indexable inserts — Dimensions — Addendum 1

Cartridges, type A, for indexable inserts — Dimensions

Indexable hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 1: Dimensions of inserts with 7 degrees normal clearance

Indexable inserts for cutting tools — Hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 2: Dimensions of inserts with 11 degrees normal clearance

Indexable inserts for cutting tools — Hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 3: V-shape inserts

Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions

Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions

Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 1: Dimensions of inserts without fixing hole

Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 1: Dimensions of inserts without fixing hole

Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 2: Dimensions of inserts with cylindrical fixing hole

Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 2: Dimensions of inserts with cylindrical fixing hole

Dimensions of accessories for cutter arbors with parallel key and tenon drive

Classification and designation of approximate chip control zones for indexable inserts with chipbreakers

Cutting tools — Designation of high-speed steel groups

Cutting tools — Designation of high-speed steel groups

Applicability of hard cutting materials for machining by chip removal — Information additional to ISO 513 designation

Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model

Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model — Amendment 1

Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model — Technical Corrigendum 1

Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model — Technical Corrigendum 2

Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items

Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items — Technical Corrigendum 1

Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items

Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items

Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items

Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items — Technical Corrigendum 1

Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items

Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items

Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items

Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items — Technical Corrigendum 1

Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items

Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items

Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items

Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items — Technical Corrigendum 1

Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items

Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts

Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts — Technical Corrigendum 1

Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts

Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems

Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems — Technical Corrigendum 1

Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems

Cutting tool data representation and exchange — Part 70: Graphical data layout — Layer setting for tool layout

Cutting tool data representation and exchange — Part 71: Graphical data layout — Creation of documents for standardized data exchange: Graphical product information

Cutting tool data representation and exchange — Part 72: Creation of documents for the standardized data exchange — Definition of properties for drawing header and their XML-data exchange

Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D models — Overview and principles

Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D models — Overview and principles

Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries

Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries

Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries — Technical Corrigendum 1

Cutting tool data representation and exchange — Part 150: Usage guidelines

Cutting tool data representation and exchange — Part 201: Creation and exchange of 3D models — Regular inserts

Cutting tool data representation and exchange — Part 202: Creation and exchange of 3D models — Irregular inserts

Cutting tool data representation and exchange — Part 203: Creation and exchange of 3D models — Replaceable inserts for drilling

Cutting tool data representation and exchange — Part 204: Creation and exchange of 3D models — Inserts for reaming

Cutting tool data representation and exchange — Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies

Cutting tool data representation and exchange — Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools

Cutting tool data representation and exchange — Part 303: Creation and exchange of 3D models — Solid end mills

Cutting tool data representation and exchange — Part 304: Creation and exchange of 3D models — Solid milling cutters with arbor hole

Cutting tool data representation and exchange — Part 305: Creation and exchange of 3D models — Modular tooling systems with adjustable cartridges for boring

Cutting tool data representation and exchange — Part 306: Creation and exchange of 3D models — Drills and countersinking tools for indexable inserts

Cutting tool data representation and exchange — Part 307: Creation and exchange of 3D models — End mills for indexable inserts

Cutting tool data representation and exchange — Part 308: Creation and exchange of 3D models — Milling cutters with arbor hole for indexable inserts

Cutting tool data representation and exchange — Part 309: Creation and exchange of 3D models — Tool holders for indexable inserts

Cutting tool data representation and exchange — Part 310: Creation and exchange of 3D models — Turning tools with carbide tips

Cutting tool data representation and exchange — Part 311: Creation and exchange of 3D models — Solid reamers

Cutting tool data representation and exchange — Part 312: Creation and exchange of 3D models — Reamers for indexable inserts

Cutting tool data representation and exchange — Part 313: Creation and exchange of 3D models — Burrs

Cutting tool data representation and exchange — Part 314: Creation and exchange of 3D models — Cartridges for indexable inserts

Cutting tool data representation and exchange — Part 315: Creation and exchange of 3D models — Modelling of machine operated feed out tools

Cutting tool data representation and exchange — Part 401: Creation and exchange of 3D models — Converting, extending and reducing adaptive items

Cutting tool data representation and exchange — Part 403: Creation and exchange of 3D models — Modelling of driven tool units

Cutting tool data representation and exchange — Part 405: Creation and exchange of 3D models — Collets

Cutting tool data representation and exchange — Part 406: Creation and exchange of 3D models — Modelling of connection interface

Balancing of rotating tools and tool systems

Cubic boron nitride inserts, tipped or solid — Dimensions, types

Cubic boron nitride inserts, tipped or solid — Dimensions, types

Polycristalline diamond inserts, tipped — Dimensions, types

Polycristalline diamond inserts, tipped — Dimensions, types

CVD diamond tools — Categorization