Фильтр :
Стандарт и/или проект | Этап | ТК |
---|---|---|
Short machine taps and hand taps |
95.99 | ISO/TC 29 |
Short machine taps and hand taps — Amendment 2 |
95.99 | ISO/TC 29 |
Short machine taps and hand taps |
95.99 | ISO/TC 29/SC 9 |
Short machine taps and hand taps |
90.93 | ISO/TC 29/SC 9 |
Long shank machine taps with nominal diameters from 3 to 24 mm and 1/8 to 1 in |
95.99 | ISO/TC 29 |
Long shank machine taps with nominal diameters from 3 to 24 mm and 1/8 to 1 in — Amendment 1 |
95.99 | ISO/TC 29 |
Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in — Reduced shank taps |
90.60 | ISO/TC 29/SC 9 |
Hand taps for pipe threads for parallel and taper threads — General dimensions and marking |
95.99 | ISO/TC 29 |
Hand taps for parallel and taper pipe threads — General dimensions and marking |
95.99 | ISO/TC 29/SC 9 |
Hand taps for parallel and taper pipe threads — General dimensions and marking |
90.93 | ISO/TC 29/SC 9 |
Hand- and machine-operated circular screwing dies and hand-operated die stocks |
95.99 | ISO/TC 29 |
Hand- and machine-operated circular screwing dies and hand-operated die stocks — Amendment 1 |
95.99 | ISO/TC 29 |
Hand- and machine-operated circular screwing dies and hand-operated die stocks — Amendment 2 |
95.99 | ISO/TC 29 |
Hand- and machine-operated circular screwing dies and hand-operated die stocks |
90.93 | ISO/TC 29/SC 9 |
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion |
90.93 | ISO/TC 29/SC 9 |
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 1 |
60.60 | ISO/TC 29/SC 9 |
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Technical Corrigendum 1 |
60.60 | ISO/TC 29/SC 9 |
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 2 |
60.60 | ISO/TC 29/SC 9 |
Hand- and machine-operated circular screwing dies for taper pipe threads — R series |
95.99 | ISO/TC 29 |
Hand- and machine-operated circular screwing dies for taper pipe threads — R series |
95.99 | ISO/TC 29/SC 9 |
Hand- and machine-operated circular screwing dies for taper pipe threads — R series |
90.93 | ISO/TC 29/SC 9 |
Hand- and machine-operated circular screwing dies for parallel pipe threads — G series |
95.99 | ISO/TC 29 |
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series |
95.99 | ISO/TC 29/SC 9 |
Hand- and machine-operated circular screwing dies for parallel pipe threads — G series |
90.93 | ISO/TC 29/SC 9 |
Hardmetal heading dies — Terminology |
90.93 | ISO/TC 29/SC 9 |
As-sintered hardmetal pellets used in heading dies — Dimensions and tolerances |
90.93 | ISO/TC 29/SC 9 |
Taps and thread cutting — Nomenclature of the main types and terminology |
90.93 | ISO/TC 29/SC 9 |
Circular screwing dies — Terminology |
90.60 | ISO/TC 29/SC 9 |
Ground thread taps for pipe threads G series and Rp series — Tolerances on the threaded portion |
90.93 | ISO/TC 29/SC 9 |
Ground thread taps for pipe threads G series and Rp series — Tolerances on the threaded portion — Technical Corrigendum 1 |
60.60 | ISO/TC 29/SC 9 |
Dimensions of hexagonal dienuts |
95.99 | ISO/TC 29 |
Hexagonal dienuts |
90.60 | ISO/TC 29/SC 9 |
Long shank taps with nominal diameters from M3 to M10 — Taps with reinforced shank and recess |
95.99 | ISO/TC 29 |
Long shank taps with nominal diameters from M3 to M10 — Full-diameter shank taps with recess |
95.99 | ISO/TC 29/SC 9 |
Long shank taps with nominal diameters from M3 to M10 — Full-diameter shank taps with recess |
90.93 | ISO/TC 29/SC 9 |
High-speed steel machine taps with ground threads — Technical specifications |
90.20 | ISO/TC 29/SC 9 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.