Фильтр :
Стандарт и/или проект | Этап | ТК |
---|---|---|
Wrench and socket openings — Metric series — Tolerances for general use
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Wrench and socket openings — Tolerances for general use
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Wrench and socket openings — Tolerances for general use
|
90.93 | ISO/TC 29/SC 10 |
Combinations of double-ended wrench gaps
|
95.99 | ISO/TC 29 |
Assembly tools for screws and nuts — Double-ended wrenches — Size pairing
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Double-ended wrenches — Size pairing
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Double-ended wrenches — Size pairing
|
90.93 | ISO/TC 29/SC 10 |
Assembly tools for bolts and screws — Hexagon drive ends for power tools
|
95.99 | ISO/TC 29 |
Assembly tools for screws and nuts — Drive ends for hand- and machine-operated screwdriver bits and connecting parts — Dimensions, torque testing
|
90.93 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Driving squares — Part 1: Driving squares for hand socket tools
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Driving squares — Part 1: Driving squares for hand socket tools
|
90.93 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated wrenches and sockets
|
95.99 | ISO/TC 29/SC 10 |
Hand operated wrenches and sockets — Technical specifications
|
95.99 | ISO/TC 29/SC 10 |
Hand operated wrenches and sockets — Technical specifications — Amendment 1
|
95.99 | ISO/TC 29 |
Assembly tools for screws and nuts — Forged and tubular socket wrenches — Maximum outside head dimensions
|
95.99 | ISO/TC 29 |
Assembly tools for screws and nuts — Forged and tubular socket wrenches — Maximum outside head dimensions
|
90.60 | ISO/TC 29/SC 10 |
Spiral ratchet screwdriver ends
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Spiral ratchet screwdriver ends — Dimensions
|
95.99 | ISO/TC 29/SC 10 |
Screwdrivers for slotted-head screws — Part 1: Tips for hand- and machine-operated screwdrivers
|
95.99 | ISO/TC 29/SC 10 |
Screwdrivers for slotted-head screws — Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Screwdrivers for slotted-head screws — Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sockets — Dimensions
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sockets
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sockets
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sockets
|
90.93 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Hexagon socket screw keys — Metric series
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Hexagon socket screw keys
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Hexagon socket screw keys — Technical Corrigendum 1
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Hexagon socket screw keys
|
90.93 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket wrenches — Torque testing
|
95.99 | ISO/TC 29 |
Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket wrenches — Torque testing
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket wrenches — Dimensions and tests
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket wrenches — Dimensions and tests
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket wrenches — Dimensions and tests
|
90.93 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Torque testing
|
95.99 | ISO/TC 29 |
Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Torque testing
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Dimensions and tests
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Dimensions and tests
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Dimensions and tests
|
90.93 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches
|
90.93 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Open-end double-head engineers' wrenches, double-head box wrenches and combination wrenches — Maximum widths of heads
|
95.99 | ISO/TC 29 |
Assembly tools for screws and nuts — Double-headed open-ended wrenches, double-headed ring wrenches and combination wrenches — Maximum widths of heads
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Double-headed open-ended wrenches, double-headed box wrenches and combination wrenches — Maximum widths of heads
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Open-ended wrenches, box wrenches and combination wrenches — Maximum widths of heads
|
90.93 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Single-head engineer's wrenches — Gaps from 50 to 120 mm
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Single-head engineer's wrenches for lower torque applications — Maximum outside dimensions of heads and test torques
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Single-head engineer's wrenches for lower torque applications — Maximum outside dimensions of heads and test torques
|
90.93 | ISO/TC 29/SC 10 |
Pliers and nippers — Nomenclature
|
95.99 | ISO/TC 29/SC 10 |
Pliers and nippers — Nomenclature — Addendum 1
|
95.99 | ISO/TC 29 |
Pliers and nippers — Nomenclature
|
90.93 | ISO/TC 29/SC 10 |
Pliers and nippers — General technical requirements
|
95.99 | ISO/TC 29 |
Pliers and nippers — General technical requirements
|
95.99 | ISO/TC 29/SC 10 |
Pliers and nippers — General technical requirements
|
95.99 | ISO/TC 29/SC 10 |
Pliers and nippers — General technical requirements
|
60.60 | ISO/TC 29/SC 10 |
Pliers and nippers — Methods of test
|
95.99 | ISO/TC 29 |
Pliers and nippers — Methods of test
|
95.99 | ISO/TC 29/SC 10 |
Pliers and nippers — Methods of test
|
90.93 | ISO/TC 29/SC 10 |
Pliers and nippers — Pliers for gripping and manipulating — Dimensions
|
95.99 | ISO/TC 29 |
Pliers and nippers — Pliers for gripping and manipulating — Dimensions and test values
|
95.99 | ISO/TC 29/SC 10 |
Pliers and nippers — Pliers for gripping and manipulating — Dimensions and test values
|
90.60 | ISO/TC 29/SC 10 |
Pliers and nippers — Engineer's and lineman's pliers — Dimensions
|
95.99 | ISO/TC 29 |
Pliers and nippers — Engineer's and lineman's pliers — Dimensions and test values
|
95.99 | ISO/TC 29/SC 10 |
Pliers and nippers — Engineer's and "Lineman's" pliers — Dimensions and test values
|
95.99 | ISO/TC 29/SC 10 |
Pliers and nippers — Engineer's and Lineman's pliers — Dimensions and test values
|
60.60 | ISO/TC 29/SC 10 |
Pliers and nippers — Lever assisted side cutting pliers, end and diagonal cutting nippers — Dimensions
|
95.99 | ISO/TC 29 |
Pliers and nippers — Lever assisted side cutting pliers, end and diagonal cutting nippers — Dimensions and test values
|
90.93 | ISO/TC 29/SC 10 |
Pliers and nippers — End cutting nippers — Dimensions
|
95.99 | ISO/TC 29 |
Pliers and nippers — End cutting nippers — Dimensions — Addendum 1
|
95.99 | ISO/TC 29 |
Pliers and nippers — End cutting nippers — Dimensions and test values
|
95.99 | ISO/TC 29/SC 10 |
Pliers and nippers — End cutting nippers — Dimensions and test values
|
90.93 | ISO/TC 29/SC 10 |
Pliers and nippers — Diagonal cutting nippers — Dimensions
|
95.99 | ISO/TC 29 |
Pliers and nippers — Diagonal cutting nippers — Dimensions — Addendum 1
|
95.99 | ISO/TC 29 |
Pliers and nippers — Diagonal cutting nippers — Dimensions and test values
|
95.99 | ISO/TC 29/SC 10 |
Pliers and nippers — Diagonal cutting nippers — Dimensions and test values
|
90.93 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Adjustable wrenches — Width across flats up to 50 mm
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Adjustable wrenches
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Adjustable wrenches
|
90.60 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Four-way socket wrenches
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Four-way socket wrenches — Dimensions and torque test
|
90.60 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Hand torque tools — Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance
|
90.92 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Hand torque tools — Part 2: Requirements for calibration and determination of measurement uncertainty
|
90.92 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Hand torque tools — Requirements and test methods
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Hand torque tools — Requirements and test methods
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Hand torque tools — Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure
|
95.99 | ISO/TC 29/SC 10 |
Combination wrenches — Minimum length
|
95.99 | ISO/TC 29/SC 10 |
Spanners and wrenches — Combination wrenches — Minimum length and thickness of heads
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Combination wrenches — Lengths of wrenches and maximum thickness of heads
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Combination wrenches — Lengths of wrenches and maximum thickness of heads
|
90.93 | ISO/TC 29/SC 10 |
Torque wrenches — Test method
|
95.99 | ISO/TC 29/SC 10 |
Screwdrivers for cross-recessed head screws — Part 1: Driver points
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Screwdrivers for cross-recessed head screws — Part 1: Driver points
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Screwdrivers for cross-recessed head screws — Part 1: Driver tips
|
90.93 | ISO/TC 29/SC 10 |
Screwdrivers for cross-recessed head screws — Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Screwdrivers for cross-recessed head screws — Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers
|
90.60 | ISO/TC 29/SC 10 |
Driver points to fit cross-recessed head screws
|
95.99 | ISO/TC 29/SC 10 |
Pliers and nippers — Multiple slip joint pliers — Dimensions and test values
|
95.99 | ISO/TC 29/SC 10 |
Pliers and nippers — Multiple slip joint pliers — Dimensions and test values
|
95.99 | ISO/TC 29/SC 10 |
Pliers and nippers — Multiple slip joint pliers — Dimensions and test values
|
60.60 | ISO/TC 29/SC 10 |
Pliers and nippers for electronics — Nomenclature
|
95.99 | ISO/TC 29/SC 10 |
Pliers and nippers for electronics — Nomenclature
|
90.93 | ISO/TC 29/SC 10 |
Pliers and nippers — Construction worker's pincers — Dimensions and test values
|
90.93 | ISO/TC 29/SC 10 |
Pliers and nippers — Carpenter's pincers — Dimensions and test values
|
90.93 | ISO/TC 29/SC 10 |
Pliers and nippers — Slip joint pliers — Dimensions and test values
|
95.99 | ISO/TC 29/SC 10 |
Pliers and nippers — Slip joint pliers — Dimensions and test values
|
95.99 | ISO/TC 29/SC 10 |
Pliers and nippers — Slip joint pliers — Dimensions and test values
|
60.60 | ISO/TC 29/SC 10 |
Pliers and nippers for electronics — Single-purpose nippers — Cutting nippers
|
95.99 | ISO/TC 29/SC 10 |
Pliers and nippers for electronics — Single-purpose nippers — Cutting nippers
|
90.60 | ISO/TC 29/SC 10 |
Pliers and nippers for electronics — Single-purpose pliers — Pliers for gripping and manipulating
|
95.99 | ISO/TC 29/SC 10 |
Pliers and nippers for electronics — Single-purpose pliers — Pliers for gripping and manipulating
|
90.60 | ISO/TC 29/SC 10 |
Pliers and nippers for electronics — Test methods
|
95.99 | ISO/TC 29/SC 10 |
Pliers and nippers for electronics — Test methods
|
90.60 | ISO/TC 29/SC 10 |
Pliers and nippers for electronics — General technical requirements
|
95.99 | ISO/TC 29/SC 10 |
Pliers and nippers for electronics — General technical requirements
|
90.93 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Double-headed open-ended engineers' wrenches
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Double-headed open-ended engineers' wrenches — Length of wrenches and thickness of the heads
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Double-headed open-ended engineers' wrenches — Outside dimensions
|
90.93 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Double-headed, flat and offset, box wrenches
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Double-headed, flat and offset, box wrenches — Length of wrenches and thickness of the heads
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Doubled-headed box wrenches, flat and offset — Outside dimensions and test torques
|
90.93 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Double-headed, deep offset and modified offset, box wrenches
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Double-headed, deep offset and modified offset, box wrenches — Length of wrenches and thickness of the heads
|
95.99 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Double-headed box wrenches, deep offset and modified offset — Outside dimensions
|
90.93 | ISO/TC 29/SC 10 |
Hammers — Technical specifications concerning steel hammer heads — Test procedures
|
90.93 | ISO/TC 29/SC 10 |
Assembly tools for screws and nuts — Ratcheting wrenches — Technical requirements
|
60.60 | ISO/TC 29/SC 10 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.