Substances of paper

Paper vocabulary — First series of terms

Width of sheets of paper

Paper vocabulary — Second series of terms

Paper and board — Sampling for testing

Paper and board — Sampling to determine average quality

Paper and board — Sampling to determine average quality

Paper and board — Sampling to determine average quality

Paper and board — Conditioning of samples

Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples

Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples

Unprocessed writing and printing paper — Method of expression of dimensions and direction of manufacture

Paper — Untrimmed sizes — Designation and tolerances for primary and supplementary ranges, and indication of machine direction

Paper — Untrimmed sizes — Designation and tolerances for primary and supplementary ranges, and indication of machine direction

Paper — Untrimmed sizes — Designation and tolerances for primary and supplementary ranges, and indication of machine direction

Paper vocabulary — Third series of terms

Paper and board — Determination of moisture content — Oven-drying method

Paper and board — Determination of moisture content — Oven-drying method

Paper and board — Determination of moisture content of a lot — Oven-drying method

Paper and board — Determination of moisture content of a lot — Oven-drying method

Paper vocabulary — Fourth series of terms

Paper — Determination of bulking thickness and apparent density

Paper — Untrimmed stock sizes for the ISO-A Series — ISO primary range

Paper — Untrimmed sizes — Designation and tolerances

Paper and board — Determination of the thickness of single sheets (and method of calculation of the apparent density of board)

Paper and board — Determination of thickness and apparent bulk density or apparent sheet density

Paper and board — Determination of thickness, density and specific volume

Paper and board — Determination of thickness, density and specific volume

Paper and board — Determination of water absorption — Cobb method

Paper and board — Determination of water absorptiveness — Cobb method

Paper and board — Determination of water absorptiveness — Cobb method

Paper and board — Determination of water absorptiveness — Cobb method

Paper and board — Determination of grammage

Paper and board — Determination of grammage

Paper and board — Determination of grammage

Paper and board — Determination of grammage

Paper — Untrimmed stock sizes for the ISO-A Series — ISO supplementary range

Paper, board, pulps and cellulosic nanomaterials — Determination of dry matter content by oven-drying method — Part 1: Materials in solid form

Paper, board, pulps and cellulosic nanomaterials — Determination of dry matter content by oven-drying method — Part 1: Materials in solid form

Paper, board, pulps and cellulosic nanomaterials — Determination of dry matter content by oven-drying method — Part 2: Suspensions of cellulosic nanomaterials

Paper, board, pulps and cellulosic nanomaterials — Determination of dry matter content by oven-drying method — Part 2: Suspensions of cellulosic nanomaterials

Paper, board and pulps — Determination of dry matter content — Oven-drying method

Paper, board and pulp — Determination of acid-soluble calcium

Paper, board and pulp — Determination of acid-soluble copper

Paper, board and pulp — Determination of acid-soluble iron

Paper vocabulary — Fifth series of terms

Paper, board and pulps — Determination of acid-soluble manganese

Paper vocabulary — Sixth series of terms (Definition of optical properties

Paper and board — Determination of tensile properties — Part 1: Constant rate of loading method

Paper and board — Determination of tensile properties — Part 1: Constant rate of loading method

Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method

Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method

Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min)

Paper and board — Determination of tensile properties — Part 3: Constant rate of elongation method (100 mm/min)

Paper and board — Determination of tensile strength

Paper — Determination of tearing resistance

Paper — Determination of tearing resistance (Elmendorf method)

Paper — Determination of tearing resistance — Elmendorf method

Paper and board — Determination of ash

Paper and board — Determination of ash

Paper, board and pulps — Determination of residue (ash) on ignition at 900 degrees C

Paper, board and pulps — Determination of residue (ash) on ignition at 900 degrees C

Paper, board, pulps and cellulose nanomaterials — Determination of residue (ash content) on ignition at 900 °C

Paper, board and pulps — Measurement of diffuse reflectance factor

Paper, board and pulps — Measurement of diffuse reflectance factor

Paper, board and pulps — Measurement of diffuse reflectance factor — Technical Corrigendum 1

Paper, board and pulps — Measurement of diffuse radiance factor

Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor)

Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor)

Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 1: Indoor daylight conditions (ISO brightness)

Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 1: Indoor daylight conditions (ISO brightness)

Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 2: Outdoor daylight conditions (D65 brightness)

Paper and board — Measurement of diffuse blue reflectance factor (ISO brightness)

Paper and board — Measurement of diffuse blue reflectance factor (ISO brightness)

Paper, board and pulps — Measurement of diffuse blue reflectance factor (ISO brightness)

Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method

Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method

Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method

Paper and board — Determination of bending resistance — Part 1: Constant rate of deflection

Paper and board — Determination of bending resistance — Part 2: Taber-type tester

Paper and board — Determination of resistance to bending — Part 2: Taber-type tester

Paper and board — Determination of stiffness — Static bending method

Paper and board — Determination of resistance to bending

Paper and board — Recommended procedure for the determination of roughness — Constant-pressure air-flow method

Sheet materials — Determination of water vapour transmission rate — Dish method

Sheet materials — Determination of water vapour transmission rate — Gravimetric (dish) method

Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method

Paper — Determination of bursting strength

Paper — Determination of bursting strength

Paper — Determination of bursting strength

Board — Determination of bursting strength

Board — Determination of bursting strength

Board — Determination of bursting strength

Corrugated fibreboard — Determination of thickness

Single-faced and single-wall corrugated fibreboard — Determination of flat crush resistance

Board — Determination of puncture resistance

Board — Determination of puncture resistance using a pendulum device

Corrugated fibreboard — Determination of edgewise crush resistance

Corrugated fibreboard — Determination of edgewise crush resistance (Unwaxed edge method)

Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method)

Corrugated fibreboard — Determination of the grammage of the component papers after separation

Paper and board — Determination of air resistance (Gurley)

Paper and board — Determination of bursting strength after immersion in water

Paper and board — Determination of bursting strength after immersion in water

Paper — Preparation of a letterpress print for test purposes

Paper and board — Determination of tensile strength after immersion in water

Paper and board — Determination of tensile strength after immersion in water

Paper and board — Determination of resistance to picking — Accelerating speed method using the IGT tester (Pendulum or spring model)

Paper and board — Determination of resistance to picking — Accelerating speed method using the IGT tester (Electric model)

Paper and board — Determination of resistance to picking — Accelerated speed method using the IGT-type tester (electric model)

Paper, board, pulps and related terms — Vocabulary — Part 1: Alphabetical index

Paper, board, pulps and related terms — Vocabulary — Part 1: Alphabetical index

Paper, board, pulps and related terms — Vocabulary — Part 4: Paper and board grades and converted products

Paper, board, pulps and related terms — Vocabulary — Part 4: Paper and board grades and converted products

Paper, board, pulps and related terms — Vocabulary — Part 5: Properties of pulp, paper and board

Paper, board, pulps and related terms — Vocabulary — Part 5: Properties of pulp, paper and board

Paper, board, pulp and related terms — Vocabulary

Paper, board and pulps — International calibration of testing apparatus — Nomination and acceptance of standardizing and authorized laboratories

Paper, board and pulps — General requirements for the competence of laboratories authorized for the issue of optical reference transfer standards of level 3

Paper — Determination of folding endurance

Paper — Determination of folding endurance

Paper and board — Determination of smoothness (Bekk method)

Paper and board — Determination of smoothness (Bekk method)

Paper and board — Determination of smoothness (Bekk method) — Technical Corrigendum 1

Paper and board — Determination of bending stiffness by static methods — General principles

Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods

Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods

Paper and board — Determination of bending stiffness — Resonance method

Paper and board — Determination of bending stiffness — Resonance method

Paper and board — Accelerated ageing — Part 1: Dry heat treatment

Paper and board — Accelerated ageing — Part 1: Dry heat treatment at 105 degrees C

Paper and board — Accelerated ageing — Part 2: Moist heat treatment at 90 degrees C and 25 % relative humidity

Paper and board — Accelerated ageing — Part 3: Moist heat treatment at 80 degrees C and 65 % relative humidity

Paper and board — Accelerated ageing — Part 3: Moist heat treatment at 80 degrees C and 65 % relative humidity

Paper and board — Accelerated ageing — Part 4: Dry heat treatment at 120 or 150 degrees C

Paper and board — Accelerated ageing — Part 5: Exposure to elevated temperature at 100 degrees C

Paper and board — Accelerated ageing — Part 6: Exposure to atmospheric pollution (nitrogen dioxide)

Paper and board — Accelerated ageing — Part 7: Exposure to light

Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight conditions (C/2 degrees)

Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight conditions (C/2 degrees)

Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight conditions (C/2°)

Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees)

Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees)

Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees)

Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10°)

Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2 degrees)

Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2 degrees)

Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2 degrees)

Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2°)

Paper and board — Determination of colour (C/2 degrees) — Diffuse reflectance method

Paper and board — Determination of resistance to water penetration

Paper and board — Determination of grease resistance

Paper and board — Determination of grease resistance — Technical Corrigendum 1

Paper — Measurement of dimensional change after immersion in water

Paper and board — Determination of air permeance (medium range) — Part 1: General method

Paper and board — Determination of air permeance (medium range) — Part 2: Schopper method

Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method

Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method

Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method

Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method

Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method

Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method

Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method

Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method — Technical Corrigendum 1

Paper and board — Determination of air permeance and air resistance (medium range) — Part 5: Gurley method

Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method

Paper and board — Determination of air permeance (medium range) — Part 6: Oken method

Paper and board — Determination of water absorption and increase in thickness after immersion in water

Paper and board — Determination of water absorption after immersion in water

Paper and board — Determination of water absorption after immersion in water

Solid fibreboard — Determination of grammage of single layers

Paper and board — Determination of titanium dioxide content

Paper and board — Determination of titanium dioxide content

Paper, board and pulps — Units for expressing properties

Paper, board and pulps — Units for expressing properties

Paper, board and pulps — Determination of conductivity of aqueous extracts

Paper, board and pulps — Determination of conductivity of aqueous extracts

Paper, board and pulps — Determination of conductivity of aqueous extracts

Paper, board and pulps — Determination of pH of aqueous extracts — Part 1: Cold extraction

Paper, board and pulps — Determination of pH of aqueous extracts — Part 1: Cold extraction

Paper, board and pulps — Determination of pH of aqueous extracts — Part 1: Cold extraction

Paper, board and pulps — Determination of pH of aqueous extracts — Part 1: Cold extraction

Paper, board and pulps — Determination of pH of aqueous extracts — Part 2: Hot extraction

Paper, board and pulps — Determination of pH of aqueous extracts — Part 2: Hot extraction

Paper, board and pulps — Determination of pH of aqueous extracts — Part 2: Hot extraction

Paper, board and pulps — Determination of pH of aqueous extracts — Part 2: Hot extraction

Paper, board and pulps — Determination of pH of aqueous extracts

Corrugating medium — Determination of the flat crush resistance after laboratory fluting

Corrugating medium — Determination of the flat crush resistance after laboratory fluting

Corrugating medium — Determination of the flat crush resistance after laboratory fluting

Testing of paper and board — Compressive strength of an in s-shape fixed sample

Paper and board — Measurement of hygroexpansivity — Part 1: Hygroexpansivity up to a maximum relative humidity of 68 %

Paper and board — Measurement of hygroexpansivity — Part 1: Hygroexpansivity up to a maximum relative humidity of 68 %

Paper and board — Measurement of hygroexpansivity — Part 2: Hygroexpansivity up to a maximum relative humidity of 86 %

Paper and board — Measurement of specular gloss — Part 1: 75 degree gloss with a converging beam, TAPPI method

Paper and board — Measurement of specular gloss — Part 1: 75 degree gloss with a converging beam, TAPPI method

Paper and board — Measurement of specular gloss — Part 2: 75 degree gloss with a parallel beam, DIN method

Paper and board — Measurement of specular gloss — Part 2: 75 degree gloss with a parallel beam, DIN method

Paper and board — Measurement of specular gloss — Part 3: 20 degree gloss with a converging beam, TAPPI method

Paper and board — Measurement of specular gloss — Part 3: 20 degree gloss with a converging beam, TAPPI method

Paper and board — Determination of microbiological properties — Part 1: Total bacterial count

Pulp, paper and board — Microbiological examination — Part 1: Total count of bacteria, yeast and mould based on disintegration

Pulp, paper and board — Microbiological examination — Part 1: Enumeration of bacteria and bacterial spores based on disintegration

Pulp, paper and board — Microbiological examination — Part 2: Enumeration of bacteria, yeast and mould on surface

Pulp, paper and board — Microbiological examination — Part 3: Enumeration of yeast and mould based on disintegration

Paper and board — Determination of capillary rise — Klemm method

Paper and board — Determination of roughness/smoothness (air leak methods) — Part 1: General method

Paper and board — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method

Paper and board — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method

Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method

Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method

Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method

Paper and board — Determination of roughness/smoothness (air leak methods) — Part 4: Print-surf method

Paper and board — Determination of roughness/smoothness (air leak methods) — Part 4: Print-surf method

Paper and board — Determination of roughness/smoothness (air leak methods) — Part 4: Print-surf method

Paper and board — Determination of roughness/smoothness (air leak methods) — Part 5: Oken method

Paper, board and pulps — Fibre furnish analysis — Part 1: General method

Paper, board and pulps — Fibre furnish analysis — Part 1: General method

Paper, board and pulps — Fibre furnish analysis — Part 2: Staining guide

Paper, board and pulps — Fibre furnish analysis — Part 3: Herzberg staining test

Paper, board and pulps — Fibre furnish analysis — Part 4: Graff "C" staining test

Paper, board and pulps — Fibre furnish analysis — Part 5: Lofton-Merritt staining test (modification of Wisbar)

Paper, board and pulps — Fibre furnish analysis — Part 6: Determination of fibre coarseness

Paper, board and pulps — Fibre furnish analysis — Part 7: Determination of weight factor

Paper, board and pulps — Determination of water-soluble chlorides — Part 1: General method

Paper, board and pulps — Determination of water-soluble chlorides — Part 2: Method for high purity products

Paper, board and pulps — Determination of water-soluble chlorides

Paper, board and pulps — Determination of water-soluble chlorides

Paper, board and pulps — Determination of water-soluble chlorides

Paper, board and pulps — Determination of water-soluble sulfates — Titrimetric method

Paper, board and pulp — Determination of water-soluble sulfates

Paper, board and pulp — Determination of water-soluble sulfates

Paper — Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)

Paper — Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)

Paper — Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)

Information and documentation — Paper for documents — Requirements for permanence

Information and documentation — Paper for documents — Requirements for permanence

Paper and board — Compressive strength — Short span test

Paper and board — Compressive strength — Short-span test

Paper and board — Determination of water vapour transmission rate of sheet materials — Dynamic sweep and static gas methods

Paper and board — Determination of water vapour transmission rate of sheet materials — Dynamic sweep and static gas methods

Paper, board and pulps — Basic terms and equations for optical properties

Paper and board — Determination of alkali reserve

Paper and board — Determination of alkali reserve

Paper, board and pulps — Determination of cadmium content — Atomic absorption spectrometric method

Paper, board and pulps — Determination of cadmium content — Atomic absorption spectrometric method

Paper and board — Determination of air permeance — Low range

Paper and board — Testing of cores — Part 1: Sampling

Paper and board — Testing of cores — Part 2: Conditioning of test samples

Paper and board — Testing of cores — Part 3: Determination of moisture content using the oven drying method

Paper and board — Testing of cores — Part 4: Measurement of dimensions

Paper and board — Testing of cores — Part 4: Measurement of dimensions

Paper and board — Testing of cores — Part 4: Measurement of dimensions

Paper and board — Testing of cores — Part 5: Determination of characteristics of concentric rotation

Paper and board — Testing of cores — Part 5: Determination of characteristics of concentric rotation

Paper and board — Testing of cores — Part 5: Determination of characteristics of concentric rotation — Technical Corrigendum 1

Paper and board — Testing of cores — Part 5: Determination of characteristics of concentric rotation

Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method

Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method

Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method

Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method

Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis

Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis

Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis — Technical Corrigendum 1

Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis

Paper and board — Testing of cores — Part 9: Determination of flat crush resistance

Paper and board — Testing of cores — Part 9: Determination of flat crush resistance

Paper and board — Testing of cores — Part 9: Determination of flat crush resistance

Information and documentation — Archival paper — Requirements for permanence and durability

Information and documentation — Archival paper — Requirements for permanence and durability

Paper and board — Determination of CIE whiteness, D65/10 degrees (outdoor daylight)

Paper and board — Determination of CIE whiteness, D65/10 degrees (outdoor daylight)

Paper and board — Determination of CIE whiteness, D65/10 degrees (outdoor daylight)

Paper and board — Determination of CIE-whiteness, C/2 degree (indoor illumination conditions)

Paper and board — Determination of CIE whiteness, C/2 degrees (indoor illumination conditions)

Paper and board — Determination of CIE whiteness, C/2° (indoor illumination conditions)

Pulp, paper and board — Determination of total chlorine and organically bound chlorine

Pulp, paper and board — Determination of total chlorine and organically bound chlorine

Paper and board — Determination of curl using a single vertically suspended test piece

Paper and board — Determination of curl using a single vertically suspended test piece — Technical Corrigendum 1

Paper and board — Determination of curl using a single vertically suspended test piece

Paper and board — Calibration of variable-area flowmeters

Paper and board — Compressive strength — Ring crush method

Paper and board — Determination of compressive strength — Ring crush method

Paper and Pulp — Deinkability test for printed paper product mixtures containing woodfree printed paper

Paper, board and pulps — Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium

Paper, board, pulps and cellulose nanomaterials — Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium

Paper and board — Specification for internal diameters of cores for reels

Paper and board — Specification for internal diameters of cores for reels

Corrugated fibreboard — Determination of edgewise crush resistance — Waxed edge method

Corrugated fibreboard — Determination of edgewise crush resistance — Waxed edge method

Paper and board — Measurement of water contact angle by optical methods

Paper and board — Cut-size office paper — Measurement of curl in a pack of sheets

Paper and board — Cut-size office paper — Measurement of curl in a pack of sheets

Pulp, paper and board — Determination of 7 specified polychlorinated biphenyls (PCB)

Pulp, paper and board — Determination of pentachlorophenol in an aqueous extract

Pulp, paper and board — Determination of pentachlorophenol in an aqueous extract

Paper and board — Determination of the static and kinetic coefficients of friction — Horizontal plane method

Paper and board — Determination of z-directional tensile strength

Paper and board — Estimation of contraries

Paper and board — Determination of internal bond strength

Paper and board — Determination of grease resistance — Part 1: Permeability test

Paper and board — Determination of grease resistance — Part 2: Surface repellency test

Paper and board — Determination of grease resistance — Part 3: Turpentine test for voids in glassine and greaseproof papers

Corrugating medium — Determination of the edge crush resistance after laboratory fluting

Paper, board and pulps — Determination of total magnesium, total calcium, total manganese, total iron and total copper

Paper and board — Determination of fracture toughness — Constant rate of elongation method (1,7 mm/s)

Paper and board — Automated off-line testing of physical properties for CD (cross direction) profiles

Paper, board and printing inks – Printability – Laboratory test method for offset ink setting

Paper and board — Automated on-line testing — Metrological comparability between standardized measurements and output of on-line gauges

Paper — Requirements for stability for general graphic applications

Paper and pulp — Deinkability test for printed paper products

Paper — Cut-size office paper — Measurement of edge quality

Pulp and paper — Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement

Paper — Determination of transmittance by diffuse reflectance measurement

Paper — Determination of transmittance by diffuse reflectance measurement

Information and documentation — Papers and boards used for conservation — Measurement of impact of volatiles on cellulose in paper

Paper, board and graphic technology — Determination of the coating strength in the inner fold

Paper and board — Stylus contact method — Part 1: Determination of surface roughness

Paper, board and pulps — Estimation of uncertainty for test methods by interlaboratory comparisons

Paper, board and pulps — Estimation of uncertainty for test methods

Paper, board and pulps — Estimation of uncertainty for test methods by interlaboratory comparisons

Paper, board and pulps - Basic guidelines for image analysis measurements