Подкомитет | Заголовок подкомитета | Опубликованные стандарты | Стандарты, находящиеся на стадии разработки |
---|---|---|---|
ISO/TC 4/SC 4 | Rolling bearings - Vocabulary, boundary dimensions and geometrical product specifications | 9 | 2 |
ISO/TC 4/SC 5 | Roller Bearings | 14 | 0 |
ISO/TC 4/SC 6 | Insert bearings | 4 | 1 |
ISO/TC 4/SC 7 | Spherical plain bearings | 8 | 0 |
ISO/TC 4/SC 8 | Load ratings and life | 16 | 5 |
ISO/TC 4/SC 11 | Linear motion rolling bearings | 7 | 1 |
ISO/TC 4/SC 12 | Ball bearings | 7 | 0 |
Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 4 Секретариата | Этап | ICS |
---|---|---|
Withdrawal of ISO/R 15/1-1968
|
95.99 | |
Withdrawal of ISO/R 15/2-1970
|
95.99 | |
Rolling bearings — Radial bearings — Boundary dimensions — General plan
|
95.99 | |
Rolling bearings — Radial bearings — Boundary dimensions — General plan — Addendum 1: Diameter series 7 (d greater than or equal to 12 mm and less than or equal to 30 mm)
|
95.99 | |
Rolling bearings — Radial bearings — Boundary dimensions, general plan
|
95.99 | |
Rolling bearings — Radial bearings — Boundary dimensions, general plan
|
95.99 | |
Rolling bearings — Radial bearings — Boundary dimensions, general plan
|
90.93 | |
Rolling bearings — Static load ratings
|
95.99 | |
Rolling bearings — Thrust bearings with flat back faces — Boundary dimensions
|
95.99 | |
Rolling bearings — Thrust bearings — Boundary dimensions, general plan
|
95.99 | |
Rolling bearings — Thrust bearings — Boundary dimensions, general plan
|
95.99 | |
Rolling bearings — Thrust bearings — Boundary dimensions, general plan
|
90.93 | |
Rolling bearing accessories — Part 1: Tapered sleeves
|
95.99 | |
Rolling bearing accessories — Part 2: Plummer block housings
|
95.99 | |
Rolling bearings — Plummer block housings — Boundary dimensions
|
95.99 | |
Rolling bearings — Plummer block housings — Boundary dimensions
|
95.99 | |
Rolling bearings — Plummer block housings — Boundary dimensions
|
90.93 | |
Withdrawal of ISO/R 199-1961
|
95.99 | |
Withdrawal of ISO/R 199-1968
|
95.99 | |
Withdrawal of ISO/R 200-1961
|
95.99 | |
Withdrawal of ISO/R 201-1961
|
95.99 | |
Cylindrical roller bearings — Separate thrust collars — Boundary dimensions
|
95.99 | |
Rolling bearings — Cylindrical roller bearings, separate thrust collars — Boundary dimensions
|
95.99 | |
Rolling bearings — Dynamic load ratings and rating life — Part 1: Calculation methods
|
95.99 | |
Withdrawal of ISO/R 300/I-1963
|
95.99 | |
Withdrawal of ISO/R 300/II-1965
|
95.99 | |
Withdrawal of ISO/R 300/III-1968
|
95.99 | |
Withdrawal of ISO/R 355/1-1963
|
95.99 | |
Withdrawal of ISO/R 355/2-1965
|
95.99 | |
Withdrawal of ISO/R 355/3-1967
|
95.99 | |
Withdrawal of ISO/R 355/4-1968
|
95.99 | |
Withdrawal of ISO/R 355/5-1969
|
95.99 | |
Withdrawal of ISO/R 355/6-1970
|
95.99 | |
Withdrawal of ISO/R 355/7-1970
|
95.99 | |
Withdrawal of ISO/R 355/8-1973
|
95.99 | |
Rolling bearings — Metric tapered roller bearings — Boundary dimensions and series designations
|
95.99 | |
Rolling bearings — Metric tapered roller bearings — Boundary dimensions and series designations — Addendum 1
|
95.99 | |
Rolling bearings — Metric tapered roller bearings — Boundary dimensions and series designations — Addendum 2
|
95.99 | |
Rolling bearings — Tapered roller bearings — Boundary dimensions and series designations
|
95.99 | |
Rolling bearings — Tapered roller bearings — Boundary dimensions and series designations — Amendment 1
|
95.99 | |
Rolling bearings with locating snap ring — Dimensions
|
95.99 | |
Withdrawal of ISO/R 465-1965
|
95.99 | |
Radial bearings — Tolerances
|
95.99 | |
Withdrawal of ISO/R 533-1966
|
95.99 | |
Withdrawal of ISO/R 577/1-1967
|
95.99 | |
Withdrawal of ISO/R 477/2-1968
|
95.99 | |
Withdrawal of ISO 477/3-1973
|
95.99 | |
Rolling bearings — Tapered roller bearings — Inch series — Tolerance classes 4 (normal tolerances), 3, 0 and 00
|
95.99 | |
Tapered roller bearings — Inch series — Tolerances
|
95.99 | |
Rolling bearings — Metric series — Chamfer dimension limits
|
95.99 | |
Withdrawal of ISO/R 1038-1969
|
95.99 | |
Tapered roller bearings — Inch series — Chamfer dimension limits
|
95.99 | |
Rolling bearings — Tolerances — Definitions
|
95.99 | |
Rolling bearings for railway axle-boxes — Acceptance inspection
|
95.99 | |
Needle roller bearings — Light and medium series — Dimensions and tolerances
|
95.99 | |
Rolling bearings — Instrument precision bearings
|
95.99 | |
Rolling bearings — Instrument precision bearings
|
95.99 | |
Withdrawal of ISO/R 1646-1970
|
95.99 | |
Withdrawal of ISO/R 1648-1971
|
95.99 | |
Rolling bearings — Bearings with spherical outside surface and extended inner ring width
|
95.99 | |
Withdrawal of ISO 2265-1972
|
95.99 | |
Withdrawal of ISO 2316-1973
|
95.99 | |
Rolling bearings — Tapered roller bearings — Sub-units — Tolerances — Metric series, normal tolerance class and tolerance class 6 — Inch series, tolerance class 4 (normal tolerance class)
|
95.99 | |
Rolling bearings — Accessories — Part 1: Tapered sleeves — Dimensions
|
95.99 | |
Rolling bearings — Accessories — Part 2: Locknuts and locking devices — Dimensions
|
95.99 | |
Rolling bearings — Accessories — Part 2: Locknuts and locking devices — Dimensions
|
95.99 | |
Rolling bearings — Locknuts, narrow series, and lockwashers with straight inner tab
|
95.99 | |
Rolling bearings — Locknuts, wide series, and lockwashers with bent inner tab
|
95.99 | |
Withdrawal of ISO 3097-1974
|
95.99 | |
Rolling bearings — Bearings with spherical outside surface and extended inner ring width — Eccentric locking collars
|
95.99 | |
Rolling bearings — Bearings with spherical outside surface and extended inner ring width — Cast and pressed housings
|
95.99 | |
Rolling bearings — Bearing parts — Balls for rolling bearings
|
95.99 | |
Rolling bearings — Balls — Dimensions and tolerances
|
95.99 | |
Rolling bearings — Balls — Dimensions and tolerances
|
95.99 | |
Rolling bearings — Ceramic rolling elements — Terms and characteristics of surface imperfections
|
60.60 | |
Rolling bearings — Vocabulary
|
95.99 | |
Rolling bearings — Vocabulary
|
95.99 | |
Rolling bearings — Vocabulary — Amendment 1
|
95.99 | |
Rolling bearings — Vocabulary
|
95.99 | |
Rolling bearings — Vocabulary
|
60.60 | |
Rolling bearings — Radial internal clearance
|
95.99 | |
Spherical plain radial bearings, joint type — Boundary dimensions — Part 1: Dimension series E and G
|
95.99 | |
Withdrawal of ISO 6124-1979
|
95.99 | |
Rolling bearings — Needle rollers — Tolerances
|
95.99 | |
Rolling bearings — Test and assessment methods for cleanliness
|
60.60 | |
Radial ball bearings with flanged outer ring — Flange dimensions
|
95.99 | |
Radial ball bearings with flanged outer ring — Flange dimensions — Technical Corrigendum 1
|
95.99 | |
Rolling bearings — Radial ball bearings with flanged outer ring — Flange dimensions
|
95.99 | |
Rolling bearings — Metric tapered roller bearings — Designation system
|
95.99 | |
Rolling bearings — Single-row cylindrical roller bearings — Chamfer dimensions for loose rib and non-rib sides
|
95.99 | |
Rolling bearings — Symbols for quantities
|
95.99 | |
Rolling bearings — Symbols for physical quantities
|
90.60 | |
Rolling bearings — Symbols for physical quantities — Amendment 1
|
60.60 | |
Rolling bearings — Measuring methods for vibration — Part 1: Fundamentals
|
90.93 | |
Rolling bearings — Measuring methods for vibration — Part 2: Radial ball bearings with cylindrical bore and outside surface
|
90.93 | |
Rolling bearings — Measuring methods for vibration — Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface
|
95.99 | |
Rolling bearings — Measuring methods for vibration — Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface
|
90.93 | |
Rolling bearings — Measuring methods for vibration — Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface
|
95.99 | |
Rolling bearings — Measuring methods for vibration — Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface
|
90.93 | |
Rolling bearings — Damage and failures — Terms, characteristics and causes
|
95.99 | |
Rolling bearings — Damage and failures — Terms, characteristics and causes
|
90.93 | |
Rolling bearings and spherical plain bearings — Search structure for electronic media — Characteristics and performance criteria identified by attribute vocabulary
|
95.99 | |
Rolling bearings and spherical plain bearings — Search structure for electronic media — Characteristics and performance criteria identified by property vocabulary
|
90.92 | |
Rolling bearings — Noise testing of rolling bearing greases — Part 1: Basic principles, testing assembly and test machine
|
60.60 | |
Rolling bearings — Noise testing of rolling bearing greases — Part 2: Test and evaluation method BQ+
|
60.60 | |
Rolling bearings — Noise testing of rolling bearing greases — Part 3: Test and evaluation method MQ
|
60.60 | |
Rolling bearings — Noise testing of rolling bearing greases — Part 4: Test and evaluation method NQ
|
60.60 | |
Rolling bearings — Parts library — Part 1: Reference dictionary for rolling bearings
|
95.99 | |
Rolling bearings — Parts library — Reference dictionary for rolling bearings and spherical plain bearings
|
30.99 | |
Rolling bearings — Parts library — Reference dictionary for rolling bearings
|
90.92 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.