Reference number
ISO 14701:2018
International Standard
ISO 14701:2018
Surface chemical analysis — X-ray photoelectron spectroscopy — Measurement of silicon oxide thickness
Edition 2
2018-11
Preview
ISO 14701:2018
74818
недоступно на русском языке
Опубликовано (Версия 2, 2018)

ISO 14701:2018

ISO 14701:2018
74818
Язык
Формат
CHF 96
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

This document specifies several methods for measuring the oxide thickness at the surfaces of (100) and (111) silicon wafers as an equivalent thickness of silicon dioxide when measured using X-ray photoelectron spectroscopy. It is only applicable to flat, polished samples and for instruments that incorporate an Al or Mg X-ray source, a sample stage that permits defined photoelectron emission angles and a spectrometer with an input lens that can be restricted to less than a 6° cone semi-angle. For thermal oxides in the range 1 nm to 8 nm thickness, using the best method described in this document, uncertainties, at a 95 % confidence level, could typically be around 2 % and around 1 % at optimum. A simpler method is also given with slightly poorer, but often adequate, uncertainties.

Общая информация

  •  : Опубликовано
     : 2018-11
    : Рассылка краткого отчета о пересмотре [90.60]
  •  : 2
  • ISO/TC 201/SC 7
    71.040.40 
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ