Filter :
Standard and/or project under the direct responsibility of ISO/TC 131/SC 5 Secretariat | Stage | ICS |
---|---|---|
Fluid power systems and components — Three-pin electrical plug connectors with earth contact — Characteristics and requirements
|
90.93 | |
Hydraulic fluid power — Four-port directional control valves — Mounting surfaces
|
95.99 | |
Hydraulic fluid power — Four-port directional control valves — Mounting surfaces
|
95.99 | |
Hydraulic fluid power — Four-port directional control valves — Mounting surfaces
|
90.93 | |
Hydraulic fluid power — Valves — Determination of pressure differential/flow characteristics
|
95.99 | |
Hydraulic fluid power — Valves — Determination of pressure differential/flow characteristics
|
95.99 | |
Hydraulic fluid power — Valves — Determination of differential pressure/flow rate characteristics
|
90.93 | |
Pneumatic fluid power — Five-port directional control valves — Part 1: Mounting interface surfaces without electrical connector
|
95.99 | |
Pneumatic fluid power — Five-port directional control valves — Part 1: Mounting interface surfaces without electrical connector
|
90.93 | |
Pneumatic fluid power — Five-port directional control valves — Part 1: Mounting interface surfaces without electrical connector — Technical Corrigendum 1
|
60.60 | |
Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector
|
95.99 | |
Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector
|
90.93 | |
Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector — Amendment 1
|
60.60 | |
Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector — Technical Corrigendum 1
|
60.60 | |
Pneumatic fluid power — Five-port directional control valves — Part 3: Code system for communication of valve functions
|
95.99 | |
Hydraulic fluid power — Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves — Mounting surfaces
|
95.99 | |
Hydraulic fluid power — Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves — Mounting surfaces
|
95.99 | |
Hydraulic fluid power — Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves — Mounting surfaces
|
90.93 | |
Pneumatic fluid power — Compressed air filters — Part 1: Main characteristics to be included in commercial literature and specific requirements
|
95.99 | |
Pneumatic fluid power — Compressed-air filters — Part 1: Main characteristics to be included in suppliers' literature and product marking requirements
|
95.99 | |
Pneumatic fluid power — Compressed air filters — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
|
90.93 | |
Pneumatic fluid power — Compressed-air filters — Part 2: Test methods to determine the main characteristics to be included in supplier's literature
|
90.93 | |
Hydraulic fluid power — Code for identification of valve mounting surfaces
|
95.99 | |
Hydraulic fluid power — Code for identification of valve mounting surfaces and cartridge valve cavities
|
95.99 | |
Hydraulic fluid power — Code for identification of valve mounting surfaces and cartridge valve cavities
|
90.60 | |
Fluid power systems and components — Fluid logic circuits — Part 1: Symbols for binary logic and related functions
|
95.99 | |
Fluid power systems and components — Fluid logic circuits — Part 2: Symbols for supply and exhausts as related to logic symbols
|
95.99 | |
Fluid power systems and components — Fluid logic circuits — Part 3: Symbols for logic sequencers and related functions
|
95.99 | |
Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces
|
95.99 | |
Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces
|
95.99 | |
Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces
|
90.93 | |
Hydraulic fluid power — Pressure-relief valves — Mounting surfaces
|
95.99 | |
Hydraulic fluid power — Pressure-relief valves — Mounting surfaces
|
90.93 | |
Pneumatic fluid power — Compressed air lubricators — Part 1: Main characteristics to be included in commercial literature and specific requirements
|
95.99 | |
Pneumatic fluid power — Compressed-air lubricators — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
|
95.99 | |
Pneumatic fluid power — Compressed-air lubricators — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
|
95.99 | |
Pneumatic fluid power — Compressed-air lubricators — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
|
90.93 | |
Pneumatic fluid power — Compressed-air lubricators — Part 2: Test methods to determine the main characteristics to be included in supplier's literature
|
95.99 | |
Pneumatic fluid power — Compressed-air lubricators — Part 2: Test methods to determine the main characteristics to be included in supplier's literature
|
95.99 | |
Pneumatic fluid power — Compressed-air lubricators — Part 2: Test methods to determine the main characteristics to be included in supplier's literature
|
90.60 | |
Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 1: General rules and test methods for steady-state flow
|
90.93 | |
Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 1: General rules and test methods for steady-state flow — Amendment 1: Effective conductance
|
60.60 | |
Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 1: General rules and test methods for steady-state flow — Amendment 2: Annex C - Evaluation of measurement uncertainty
|
20.60 | |
Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 2: Alternative test methods
|
95.99 | |
Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 2: Alternative test methods
|
90.20 | |
Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 2: Alternative test methods — Amendment 1: Annex A - Evaluation of measurement uncertainty
|
20.60 | |
Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 3: Method for calculating steady-state flow-rate characteristics of systems
|
90.93 | |
Hydraulic fluid power — Valves controlling flow and pressure — Test methods
|
90.92 | |
Hydraulic fluid power — Valves controlling flow and pressure — Test methods
|
30.00 |
|
Fluid power systems and components — Two-pin electrical plug connector with earth contact — Characteristics and requirements
|
95.99 | |
Fluid power systems and components — Two-pin electrical plug connectors with earth contact — Characteristics and requirements
|
90.93 | |
Pneumatic fluid power — Air line pressure regulators — Part 1: Main characteristics to be included in commercial literature and specific requirements
|
95.99 | |
Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements
|
95.99 | |
Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements — Technical Corrigendum 1
|
95.99 | |
Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements
|
95.99 | |
Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to include in supplier's literature and product-marking requirements
|
60.60 | |
Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
|
95.99 | |
Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
|
95.99 | |
Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to include in supplier’s literature
|
60.60 | |
Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators
|
90.93 | |
Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities
|
95.99 | |
Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities
|
90.92 | |
Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities
|
40.60 | |
Hydraulic fluid power — Two-, three- and four-port screw-in cartridge valves — Cavities
|
95.99 | |
Hydraulic fluid power — Two-, three- and four-port screw-in cartridge valves — Cavities — Technical Corrigendum 1
|
95.99 | |
Hydraulic fluid power — Two-, three- and four-port screw-in cartridge valves — Cavities
|
90.93 | |
Hydraulic fluid power — Four-port modular stack valves and four-port directional control valves, sizes 03 and 05 — Clamping dimensions
|
95.99 | |
Hydraulic fluid power — Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 — Clamping dimensions
|
95.99 | |
Hydraulic fluid power — Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10 — Clamping dimensions
|
90.93 | |
Pneumatic fluid power — Standard reference atmosphere
|
90.93 | |
Hydraulic fluid power — Identification of valve ports, subplates, control devices and solenoids
|
90.93 | |
Pneumatic fluid power — Electro-pneumatic continuous flow control valves — Part 1: Main characteristics to include in the supplier's literature
|
90.93 | |
Pneumatic fluid power — Electro-pneumatic continuous flow control valves — Part 2: Test methods to determine main characteristics to include in the supplier's literature
|
90.93 | |
Pneumatic fluid power — Electro-pneumatic pressure control valves — Part 1: Main characteristics to include in the supplier's literature
|
95.99 | |
Pneumatic fluid power — Electro-pneumatic pressure control valves — Part 1: Main characteristics to include in the supplier's literature
|
60.60 | |
Pneumatic fluid power — Electro-pneumatic pressure control valves — Part 2: Test methods to determine main characteristics to include in the supplier's literature
|
95.99 | |
Pneumatic fluid power — Electro-pneumatic pressure control valves — Part 2: Test methods to determine main characteristics to include in the supplier's literature
|
60.60 | |
Hydraulic fluid power — Four- and five-port servovalves — Mounting surfaces
|
90.93 | |
Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 1: Test methods for four-port directional flow-control valves
|
90.93 | |
Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 2: Test methods for three-port directional flow-control valves
|
90.93 | |
Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 3: Test methods for pressure control valves
|
60.60 | |
Pneumatic fluid power — Identification of ports and control mechanisms of control valves and other components
|
90.93 | |
Pneumatic fluid power — Directional control valves — Measurement of shifting time
|
95.99 | |
Pneumatic fluid power — Directional control valves — Measurement of shifting time
|
60.60 | |
Fluid power systems and components — 16 mm square electrical connector with earth contact — Characteristics and requirements
|
90.93 | |
Pneumatic fluid power — 3/2 solenoid valves — Mounting interface surfaces
|
90.93 | |
Pneumatic fluid power — Five-port directional control valves, sizes 18 mm and 26 mm — Part 1: Mounting interface surfaces without electrical connector
|
90.93 | |
Pneumatic fluid power — Five-port directional control valves, sizes 18 mm and 26 mm — Part 2: Mounting interface surfaces with optional electrical connector
|
90.93 | |
Hydraulic fluid power — Pressure switches — Mounting surfaces
|
95.99 | |
Hydraulic fluid power — Pressure switches — Mounting surfaces — Amendment 1
|
95.99 | |
Hydraulic fluid power — Pressure switches — Mounting surfaces
|
90.93 | |
Hydraulic fluid power — Identification of manifold assemblies and their components
|
90.93 | |
Pneumatic fluid power — Valves — Data to be included in supplier literature
|
90.60 | |
Hydraulic fluid power — Two-, three- and four-port screw-in cartridge valves — Cavities with ISO 725 (UN and UNF) threads
|
90.93 | |
Pneumatic fluid power — Test methods for measuring acoustic emission pressure levels of exhaust silencers
|
90.92 | |
Pneumatic fluid power — Test methods for measuring acoustic emission pressure levels of exhaust silencers
|
40.98 | |
Pneumatic fluid power — Test methods for measuring acoustic emission pressure levels of exhaust silencers
|
20.60 |
|
Pneumatic fluid power systems — Directional control valves — Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm
|
95.99 | |
Pneumatic fluid power systems — Directional control valves — Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm — Technical Corrigendum 1
|
95.99 | |
Pneumatic fluid power systems — Directional control valves — Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors
|
90.93 |
No matching records found. Please try changing the filter settings.