Filter :
Standard and/or project under the direct responsibility of ISO/TC 182 Secretariat | Stage | ICS |
---|---|---|
Geotechnical investigation and testing — Identification and classification of soil — Part 1: Identification and description
|
95.99 | |
Geotechnical investigation and testing — Identification and classification of soil — Part 1: Identification and description — Amendment 1
|
95.99 | |
Geotechnical investigation and testing — Identification and classification of soil — Part 1: Identification and description
|
90.93 | |
Geotechnical investigation and testing — Identification and classification of soil — Part 2: Principles for a classification
|
95.99 | |
Geotechnical investigation and testing — Identification and classification of soil — Part 2: Principles for a classification — Amendment 1
|
95.99 | |
Geotechnical investigation and testing — Identification and classification of soil — Part 2: Principles for a classification
|
90.93 | |
Geotechnical investigation and testing — Identification and classification of rock — Part 1: Identification and description
|
95.99 | |
Geotechnical investigation and testing — Identification, description and classification of rock
|
90.93 | |
Geotechnical investigation and testing — Laboratory testing of rock — Part 1: Determination of water content
|
40.60 | |
Geotechnical investigation and testing — Laboratory testing of rock — Part 2: Determination of bulk density
|
20.60 |
|
Geotechnical investigation and testing — Laboratory testing of rock — Part 3: Determination of the uniaxial compressive strength and deformability
|
20.00 |
|
Geotechnical investigation and testing — Geothermal testing — Determination of thermal conductivity of soil and rock using a borehole heat exchanger
|
90.93 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 1: Determination of water content
|
90.93 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 1: Determination of water content
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 1: Determination of water content — Amendment 1
|
60.60 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 1: Determination of water content — Technical Corrigendum 1
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 2: Determination of bulk density
|
90.93 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 2: Determination of density of fine-grained soil
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 2: Determination of density of fine-grained soil — Technical Corrigendum 1
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 3: Determination of particle density
|
90.93 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 3: Determination of particle density — Pycnometer method
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 3: Determination of particle density — Pycnometer method — Technical Corrigendum 1
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 4: Determination of particle size distribution
|
90.93 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 4: Determination of particle size distribution
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 4: Determination of particle size distribution — Technical Corrigendum 1
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 5: Incremental loading oedometer test
|
90.93 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 5: Incremental loading oedometer test
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 5: Incremental loading oedometer test — Technical Corrigendum 1
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 6: Fall cone test
|
90.93 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 6: Fall cone test
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 6: Fall cone test — Technical Corrigendum 1
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 7: Unconfined compression test
|
90.93 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 7: Unconfined compression test on fine-grained soils
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 7: Unconfined compression test on fine-grained soils — Technical Corrigendum 1
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 8: Unconsolidated undrained triaxial test
|
90.93 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 8: Unconsolidated undrained triaxial test
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 8: Unconsolidated undrained triaxial test — Technical Corrigendum 1
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 9: Consolidated triaxial compression tests on water saturated soils
|
90.93 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 9: Consolidated triaxial compression tests on water-saturated soils
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 9: Consolidated triaxial compression tests on water-saturated soils — Technical Corrigendum 1
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 10: Direct shear tests
|
90.93 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 10: Direct shear tests
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 10: Direct shear tests — Technical Corrigendum 1
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 11: Permeability tests
|
90.60 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 11: Determination of permeability by constant and falling head
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 11: Determination of permeability by constant and falling head — Technical Corrigendum 1
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 12: Determination of liquid and plastic limits
|
90.93 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 12: Determination of Atterberg limits
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 12: Determination of liquid and plastic limits — Amendment 1
|
60.60 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 12: Determination of Atterberg limits — Technical Corrigendum 1
|
95.99 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 12: Determination of liquid and plastic limits — Amendment 2
|
60.60 | |
Geotechnical investigation and testing — Laboratory testing of soil — Part 13: Swelling test for Soils, Hard Soils and Soft Rocks — Procedure with cycles on a single specimen
|
20.00 |
|
Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 1: General rules
|
90.93 | |
Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 2: Measurement of displacements along a line: Extensometers
|
90.93 | |
Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 3: Measurement of displacements across a line: Inclinometers
|
90.93 | |
Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 3: Measurement of displacements across a line: Inclinometers — Amendment 1
|
60.60 | |
Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 4: Measurement of pore water pressure: Piezometers
|
60.60 | |
Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 5: Stress change measurements by total pressure cells (TPC)
|
90.20 | |
Geotechnical investigation and testing -Geotechnical monitoring by field instrumentation — Part 6: Measurement of settlement: Hydraulic settlement systems
|
20.00 |
|
Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 7: Measurement of strains: Strain gauges
|
40.60 | |
Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 8: Measurement of loads: Load cells
|
60.60 | |
Geotechnical investigation and testing -Geotechnical monitoring by field instrumentation — Part 9: Measurement of displacements by geodetic means
|
20.00 |
|
Geotechnical investigation and testing — Geohydraulic testing — Part 1: General rules
|
90.93 | |
Geotechnical investigation and testing — Geohydraulic testing — Part 2: Water permeability tests in a borehole using open systems
|
90.93 | |
Geotechnical investigation and testing — Geohydraulic testing — Part 3: Water pressure tests in rock
|
90.93 | |
Geotechnical investigation and testing — Geohydraulic testing — Part 4: Pumping tests
|
95.99 | |
Geotechnical investigation and testing — Geohydraulic testing — Part 4: Pumping tests
|
60.60 | |
Geotechnical investigation and testing — Geohydraulic testing — Part 5: Infiltrometer tests
|
90.93 | |
Geotechnical investigation and testing — Geohydraulic testing — Part 6: Water permeability tests in a borehole using closed systems
|
90.93 | |
Geotechnical investigation and testing — Sampling methods and groundwater measurements — Part 1: Technical principles for execution
|
95.99 | |
Geotechnical investigation and testing — Sampling methods and groundwater measurements — Part 1: Technical principles for the sampling of soil, rock and groundwater
|
60.60 | |
Geotechnical investigation and testing — Sampling methods and groundwater measurements — Part 2: Qualification criteria for enterprises and personnel
|
95.99 | |
Geotechnical investigation and testing — Sampling methods and groundwater measurements — Part 3: Conformity assessment of enterprises and personnel by third party
|
95.99 | |
Geotechnical investigation and testing — Field testing — Part 1: Electrical cone and piezocone penetration test
|
95.99 | |
Geotechnical investigation and testing — Field testing — Part 1: Electrical cone and piezocone penetration test — Technical Corrigendum 1
|
95.99 | |
Geotechnical investigation and testing — Field testing — Part 1: Electrical cone and piezocone penetration test
|
60.60 | |
Geotechnical investigation and testing — Field testing — Part 2: Dynamic probing
|
90.93 | |
Geotechnical investigation and testing — Field testing — Part 2: Dynamic probing — Amendment 1
|
60.60 | |
Geotechnical investigation and testing — Field testing — Part 3: Standard penetration test
|
90.93 | |
Geotechnical investigation and testing — Field testing — Part 3: Standard penetration test — Amendment 1
|
60.60 | |
Geotechnical investigation and testing — Field testing — Part 4: Ménard pressuremeter test
|
95.99 | |
Geotechnical investigation and testing — Field testing — Part 4: Prebored pressuremeter test by Ménard procedure
|
60.60 | |
Geotechnical investigation and testing — Field testing — Part 5: Flexible dilatometer test
|
95.99 | |
Geotechnical investigation and testing — Field testing — Part 5: Prebored pressuremeter test
|
60.60 | |
Geotechnical investigation and testing — Field testing — Part 6: Self-boring pressuremeter test
|
90.93 | |
Geotechnical investigation and testing — Field testing — Part 7: Borehole jack test
|
90.93 | |
Geotechnical investigation and testing — Field testing — Part 8: Full displacement pressuremeter test
|
90.93 | |
Geotechnical investigation and testing — Field testing — Part 9: Field vane test (FVT and FVT-F)
|
60.60 | |
Geotechnical investigation and testing — Field testing — Part 10: Weight sounding test
|
90.93 | |
Geotechnical investigation and testing — Field testing — Part 10: Weight sounding test
|
95.99 | |
Geotechnical investigation and testing — Field testing — Part 11: Flat dilatometer test
|
90.93 | |
Geotechnical investigation and testing — Field testing — Part 11: Flat dilatometer test
|
95.99 | |
Geotechnical investigation and testing — Field testing — Part 12: Mechanical cone penetration test (CPTM)
|
90.93 | |
Geotechnical investigation and testing — Field testing — Part 14: Borehole dynamic probing
|
60.60 | |
Geotechnical investigation and testing — Field testing — Part 15: Measuring while drilling
|
90.93 | |
Geotechnical investigation and testing — Field testing — Part 16: Borehole shear test
|
60.60 | |
Geotechnical investigation and testing — Testing of geotechnical structures — Part 1: Testing of piles: static compression load testing
|
90.93 | |
Geotechnical investigation and testing — Testing of geotechnical structures — Part 2: Testing of piles: Static tension load testing
|
60.60 | |
Geotechnical investigation and testing — Testing of geotechnical structures — Part 4: Testing of piles: dynamic load testing
|
90.93 | |
Geotechnical investigation and testing — Testing of geotechnical structures — Part 5: Testing of grouted anchors
|
90.93 | |
Geotechnical investigation and testing — Testing of geotechnical structures — Part 6: Load testing of soil nails and rock bolts
|
30.99 | |
Geotechnical investigation and testing — Testing of geotechnical structures — Part 10: Testing of piles: rapid load testing
|
90.93 | |
Geotechnics — Array measurement of microtremors to estimate shear wave velocity profile
|
60.60 | |
Geotechnical investigation and testing — Qualification criteria and assessment — Part 1: Qualified technician and qualified operator
|
60.60 | |
Geotechnical investigation and testing — Qualification criteria and assessment — Part 2: Responsible expert
|
60.60 | |
Geotechnical investigation and testing — Qualification criteria and assessment — Part 3: Qualified enterprise
|
60.60 |
No matching records found. Please try changing the filter settings.